This is a library of perfboard and single-sided PCB effect layouts for guitar and bass. I'm not an electrical engineer by any stretch of the imagination, just a DIY'er who likes drawing layouts. It is meant for the hobbyist (so commercial use of any of these layout is not allowed without permission) and as a way to give back to the online DIY community.
I traced this one a while back and created the Lawn Darts PCB over on the store from it. About time I made a perf and etch layout. If a Rangemaster and an Electra ever got together and had a baby, the Arrows would be the baby. Should be an easy fit in a 1590A with the pot board mounted.
Thanks for another great layout! This one looks like a nice daughter board to put as a gain boost before some amp in a box pedals. One question, I can see the electra in the schematic, but what makes this a treble booster, the coupling caps values?
Thanks for another great layout! This one looks like a nice daughter board to put as a gain boost before some amp in a box pedals. One question, I can see the electra in the schematic, but what makes this a treble booster, the coupling caps values?
ReplyDeleteYes, tho the similarity to the Rangermaster refers more to the boost control.
DeleteVerified. Sound good. Tanx a lot! :-)
ReplyDeleteI build one and with the level cranked the volume is only slightly above unity. Any suggestions of things to try?
ReplyDeleteThanks for this!!
ReplyDelete1 - What would I need to change to lower the overall gain / dirt?
2 - If I wanted to add a volume pot - what would i need to do?
Perfect sound! Beautiful timber.
ReplyDeleteHello everyone, great Booster!
ReplyDeletebut if you swap "+" and "1" then LPF will work))