This is a library of perfboard and single-sided PCB effect layouts for guitar and bass. I'm not an electrical engineer by any stretch of the imagination, just a DIY'er who likes drawing layouts. It is meant for the hobbyist (so commercial use of any of these layout is not allowed without permission) and as a way to give back to the online DIY community.
Showing posts with label Budda. Show all posts
Showing posts with label Budda. Show all posts

Thursday, October 24, 2019

Budda Chakra Compressor

Here's an optical compressor I came across on FSB and hadn't seen a layout of it before. There's some question as to whether the schematic is accurate on FSB, so build with care. The original uses a rectifier array component, but I've broken that down into 4 discrete diodes (1N4148, 1N4001, etc.) since I figure more people will have those on hand than the rectifier component. Should fit nicely in a 1590B. Schematic and more info on FSB.


Thursday, October 4, 2018

Budda Om Overdrive

Stumbled across this one and it seems pretty cool. It's like an Escobedo Punch-in-the-Face sandwiched between two opamp gain stages, and is very similar to the Carl Martin Crush Zone. Wide range of gain and tones on tap as well. Pots are board mounted and it'll fit in a 1590B.