This is a library of perfboard and single-sided PCB effect layouts for guitar and bass. I'm not an electrical engineer by any stretch of the imagination, just a DIY'er who likes drawing layouts. It is meant for the hobbyist (so commercial use of any of these layout is not allowed without permission) and as a way to give back to the online DIY community.

Monday, April 3, 2017

EWS Bass Mids Control

Here's another one for the bass players. It's a pretty handy EQ pedal from EWS. Originals come in a 1590a, and sadly I wasn't able to duplicate that here, but it will fit fine in a 1590B with board mounted pots. Originals have the Volume control as an internal trimmer, but I've moved that to a full sized pot for more control (and a newer version of this pedal has all 3 control externally as well, so maybe I'm on to something haha). Here's the schematic for reference.



12 comments:

  1. hey bud, i'm wanting to do some cnc work for the layout drilling, can you tell me what your grid spacing is?

    ReplyDelete
    Replies
    1. All the holes should be on a 0.1" grid. The 2 inner/extra holes for that 100n cap at the top of the layout are inset 0.05".

      Delete
  2. Thanks bro! i made one for myself.. but the only thing is, i didn't know the original size of the PCB...

    ReplyDelete
    Replies
    1. Check the Transfer Image Library tab at the top of the page.

      Delete
    2. Hello Sir, thanks for the reply. I've check the tranfer library but there is no EWS bass mids control folder

      Delete
  3. Hi. do you have the PCB or layout of tri-logic bass preamp ?
    thanks

    ReplyDelete
  4. Finally had time to build this one, I used a B50K dual instead of the C50K (seems to be hard to find this one) and it works fine.
    You can now tag it as verified, it's a really nice tool to fine tune the mids on bass!
    Thanks a lot!

    ReplyDelete
  5. I build it, works fine, but with low output. Got Anyone the same problem?

    ReplyDelete