This is a library of perfboard and single-sided PCB effect layouts for guitar and bass. I'm not an electrical engineer by any stretch of the imagination, just a DIY'er who likes drawing layouts. It is meant for the hobbyist (so commercial use of any of these layout is not allowed without permission) and as a way to give back to the online DIY community.

Friday, December 7, 2018

Function F(x) Clusterfuzz

This Fuzz Friday I present you the Clusterfuzz from good dudes at Function F(x). It's a great sounding fuzz and really versatile. You might be able to squeeze this into a 125B if you can squeeze the rotary and toggle switches under the board. Otherwise a 1590BB like the original is probably the way to go.


at
Labels: , ,

8 comments:

  1. SpookybobDecember 10, 2018 at 12:25 PM

    I'm really excited to build this but I can't find the Transfer Image dropbox.

    ReplyDelete
  2. ZZOYDDecember 26, 2018 at 3:20 AM

    verified! Resistor 2k in the collector Q2 should be 10-22k, according schem there is 10k. 2k - not enough for good sustain & fuzz!Q1 used mpsa 14, working good.Instead rotary switch i used 2 SPDT.

    ReplyDelete
    Replies
    1. HitechDJuly 4, 2019 at 12:20 AM

      Yup, that resistor should be 10k as per the schematic link.thanks vit zzoyd .With 2k there is hardly any signal in my build . Used a 50k multitrim.

      Delete
  3. HitechDJuly 4, 2019 at 12:23 AM

    Great pedal,very versatile. Thank you for this layout. Excellent forum

    ReplyDelete
  4. wgmcccJanuary 9, 2020 at 2:28 PM

    Hi! Can i get principial shema? please.

    ReplyDelete
  5. AleJune 8, 2021 at 11:59 PM

    Hello, rookie question, how can i increase the “8-bit” effect??

    ReplyDelete

Subscribe to: Post Comments (Atom)