Mid-Fi Electronics Random Number Generator

 Happy Fuzz Friday, all! Here's a fun noise maker that should go together pretty easily. Schematic for reference.

Grind Customs FX Tenebrion

 The Tenebrion was designed by CultureJam and is the further development of the Box of Hall reverb. It uses the Belton BTDR-2 reverb brick, which I've designed to fit on the solder-side of the circuit board. You should be able to squeeze it into a 1590B.

The EAGLE Tutorial Continues

Thanks to everyone who bought boards over the weekend! Today starts the next chapter in the Eagle Tutorial series on YouTube: PCB creation. Go check it out!

EAGLE Tutorial

 Finally gotten around to creating this tutorial! There's a lot, so it will be released in several videos over the next couple weeks, but the first two are live on YouTube now. So if you're interested in learning Eagle CAD to layout your own PCBs, either for etching, milling or fabrication, go check it out!

Spaceman Atlas III

Hope everyone's staying safe and healthy. Today's layout is a unique preamp booster from Spaceman Effects, the Atlas III. It uses some FETs I'd never heard of in conjunction with a couple low gain silicon BJTs (use something in the 175-225 hFE range). The switch controls the phase of your signal (it's internal in the original). Schematic can be found here for reference.

Also, I updated the Make a Difference page on the website to include a few funds working to help in the aftermath of the Beruit explosion. It's killed well over 150 people, injured 6000 and left over 300,000 people homeless. If you can, do some good, offer some home and help out some people who are really hurting.

Mad Professor Simble

This is been traced for a few weeks now over on FSB and I've meant to lay it out since then, but just now getting around to it. If you don't know, it's an amp-in-a-box type trying to emulate a Dumble amp. Apparently it sounds very good with smaller amps. Should fit nicely in a 1590B with board mounted pots as per usual.

Caline Purple Smoke

Got a little booster circuit that should go together pretty easily. It's pretty much an Electra without clipping diodes and a large value resistor between base and collector (similar to the EQD Arrows). Easy fit in a 1590B or even a 1590G (probably). Schematic on FSB.