MI Audio Blues Pro

Here's a nice little overdrive circuit from MI Audio. This reflects the 2nd version of the Blues Pro, but if you want to make version 1, just jump pads 1 and 2 of each switch respectively. Should fit nicely in a 1590B.

Soil Slinger and NEWS!

It's a special Fuzz Friday! My fabricated boards came in for the Dirt Transmitter, and I finally got the chance to verify them. So I made a video of the whole build process!

Also, what's more exciting than the build video is the launch of the new Effects Layouts store! It's kind of a soft launch for now, as there aren't a whole ton of boards up yet. But more are coming! Also, aside from a few boards, stock is rather low on the boards as they're left over prototypes. But I will be ordering more soon. Don't worry, perf and etch layouts aren't stopping anytime soon. Thanks to everyone for their support over the years and for helping to create a really great international community around this great hobby.

EFFECTS LAYOUTS STORE

Way Huge Drive/Geisha Drive

The Geisha Drive (or just called Drive sometimes) was a limited run overdrive from Way Huge and is a great sounding circuit. It uses a quad opamp to form an input buffer stage, gain stage, followed by some hard clipping and a modified BMP tone stack, into the volume pot, followed by a gain recovery stage. Should fit nicely in a 1590B with the pots board mounted.

BearFoot FX Emerald Green Distortion Machine

Unique little distortion box from Bjorn. The original uses 1A1200 diodes (which are pretty big), but other (and smaller) silicon diodes can be used. Should fit nicely in a 1590B.

Run Off Groove Whisker Biscuit

For Fuzz Friday here's the Run Off Groove Whisker Biscuit–Big Muff meets Bazz Fuss. From the ROG site:

The Whisker Biscuit is a hybrid of the Bazz Fuss and the Big Muff Pi. A single Bazz Fuss stage replaces the two clipping stages of the BMP. Smooth, super-long sustain, and good clean-up with the guitar volume knob make this circuit an interesting alternative to the standard BMP.

I've included the optional 47pF caps as well as the tone control mod. Omit the 47pF caps if you want more treble, and if you prefer a more standard tone stack, replace the 22k resistors with jumpers and use a B100k pot.

Sentinel

The Sentinel is a PT2399-based pitch modulator, delay, reverb and drone verb designed by Arnoud Philip (~arph) as part of the DIYSB 10th Anniversary design contest. It's based on the Sewer Pipes ring-verb and the Noise Ensemble. Original thread here, schematic here. Should be able to squeeze it into a 1590B. 

Note: LED2 in the layout is a bi-color LED that could be used externally as a rate indicator or even the on/off indicator. For the later, use the footswitch to break/connect the connection between the common cathode (middle lead) and the 1k resistor going to ground at the top of the board. Also, the 25k trimmer is a fine tune control for the Drone pot.

Ashbory Bass Preamp

The Ashbory bass was first introduced in 1986 and is/was a half scale (18") fretless travel bass with a piezo pickup and built in preamp. That preamp is essentially a Baxendall tone stack feeding into the volume control, into an op amp based gain stage. I stumbled across the schematic and thought it would be a good addition to the library. Should fit nicely in a 1590B, or you could wire it into a bass.