This is a library of perfboard and single-sided PCB effect layouts for guitar and bass. I'm not an electrical engineer by any stretch of the imagination, just a DIY'er who likes drawing layouts. It is meant for the hobbyist (so commercial use of any of these layout is not allowed without permission) and as a way to give back to the online DIY community.

Monday, October 24, 2016

Menatone None More Black

Here's the None More Black from Menatone. It uses cascading JFET stages to produce a high gain distortion tones of the 80s all the way to modern metal tones. There are apparently some versions with and without a charge pump to run at 18v off a 9v supply. I had room for the charge pump, so I included it.


28 comments:

  1. Would a 7660s be good replacement for the Max1044 in this circuit?

    ReplyDelete
    Replies
    1. Thanks!
      And thanks again for another clear lay-out. Your layouts are always my first choice. Compact and still roomy, with nice thick lines.

      Delete
  2. Replies
    1. It's over on FSB.

      http://freestompboxes.org/viewtopic.php?f=7&t=10058&start=20#p260298

      Delete
  3. yay im stoked!! its cool to see it go all the way from the tracing step to it being on all the websites i love! best layout done of it so far and as you can see its set up for a full tone stack but he chose to use fixed resistors in a some places

    ReplyDelete
  4. Replies
    1. Socket and see! Also compare the datasheets online.

      Delete
    2. Ok i'll try and thanks for the layout

      Delete
  5. Built it and it works but the 202's really need biasing so I'll replace the biasing resistors with sockets and experiment

    ReplyDelete
  6. It works well
    I replace j202 with j201
    Thanks for this great layout man!

    ReplyDelete
  7. is the chargepump correct ? why i got 9V out not 18V output ? Please Check....

    ReplyDelete
    Replies
    1. from IC pin 3 should be grounded & IC pin 2 going to (-) 10uf elco

      Delete
    2. Ah thanks for catching that. Not sure how I messed that up. It's fixed now.

      Delete
    3. Hi guys, just a question: Nunggal wrote, that the (-) of the 10uF elec has to go to pin 2 of the IC. To me it´s going to the diodes (1n5817) and the positive side is going to pin 2 ? What´s correct? as shown or vice versa? tia

      Delete
    4. everythings ok. built it up as shown in the layout and worked instantly (I used the J202 trannies)

      Delete
  8. probably worth a mention, this is based off of the original smaller mxr sized version 1 NMB, im not positive if there was any changes that took place between mkl and the pcb 1590bb mkll version the only ones ive seen are the one this was traced from and the one other posted on fsb and i can tell you that the ones with a charge pump have 6 fets while the 9v version has only 5 of the 202's

    ReplyDelete
  9. im only getting 9 volts no matter what voltage regulator i try

    ReplyDelete
  10. do i need to add links if leaving out the charge pump

    ReplyDelete
    Replies
    1. Yes. Easiest way would be to run a jumper from where pin 1 of the IC would be to where the cathode of the right 5817 diode would be.

      Delete
    2. thank's! if it wasn't for you helping me out so often there's no way i'd understand this much after less then a year

      also I'm tracing the amt heater od if your interested in taking a look when I'm done, looks like it'll be great for boosting jfet preamps

      Delete
    3. No problem! I'm definitely interested. Shoot me a schem when you've got it traced.

      Delete
    4. still hasn't arrived yet lol slowest shipping ever, even if he sent it from russia by boat. if I want to omit the pump do i need to jumper anything

      Delete

  11. hello good day, the capacitor of 22n in Q6 is wrong, according to the scheme is 4.7n, the value must be corrected, the peal I worked perfectly without any kind of noise or hiss

    ReplyDelete
  12. I made it without charge pump and ran it with 9V. I use 2sk303 instead of j202. It sounds more vintage-ish and less fullness.

    ReplyDelete