This is a library of perfboard and single-sided PCB effect layouts for guitar and bass. I'm not an electrical engineer by any stretch of the imagination, just a DIY'er who likes drawing layouts. It is meant for the hobbyist (so commercial use of any of these layout is not allowed without permission) and as a way to give back to the online DIY community.

Monday, February 15, 2016

Ibanez TS10 Tube Screamer

The TS10 was apart of Ibanez's mid-80s Power Series of pedals. It's slightly different than a TS9 with an added resistor before signal hits the opamp and a bigger capacitor coming off the volume control. Otherwise not too much is different. I've laid this out for 9mm mini pots that can be board mounted from the solder-side.



11 comments:

  1. Dude, you are killing it! I have a Dead Astronaut Trem Shifter to be verified soon, and a bunch of other layouts I want to build, but just don't have the time. Thanks a bunch for keeping me busy when I'm not making pedals for a living, hahaha

    ReplyDelete
  2. costruito e correttamente funzionante! thanks

    ReplyDelete
  3. You can call this one verified if you haven't already. It sounds great. I've been playing with different diodes and all sound good in their own way

    ReplyDelete
  4. What kind of capacitors are those of 1uf?

    ReplyDelete
    Replies
    1. Those are box film capacitors. I get them from Tayda

      Delete
  5. can you provied a layout file.and bom

    ReplyDelete
  6. This can be turn in to a TS9 or a TS808?

    ReplyDelete
    Replies
    1. Yes. The only real difference is 220Ω resistor going to pin 3 of the IC. Make that a jumper and it's a TS808

      Delete
  7. I give up. I made two boards now and they both sound terrible. No sound at all from the guitar but instead a high annoying sound at 30-50 Hz which goes to 0 Hz when I unplug the power. I suspect there is a faulty capacitor type I use... or transistor. Where do you buy your parts?

    ReplyDelete
  8. This comment has been removed by the author.

    ReplyDelete