This is a library of perfboard and single-sided PCB effect layouts for guitar and bass. I'm not an electrical engineer by any stretch of the imagination, just a DIY'er who likes drawing layouts. It is meant for the hobbyist (so commercial use of any of these layout is not allowed without permission) and as a way to give back to the online DIY community.

Thursday, March 12, 2015

Lovepedal Karl (2-knob version)

The Karl is essentially a modified Tim Escobedo Tripple Fuzz, basing it's sound around an NPN/PNP transistor network known as a "non-selective frequency tripler." I modified the power section a little bit. The original has an unnecessary 47µ cap at 9v input before the 330Ω resistor which I eliminated. I also moved the anti-popping pull down resistor to before the Intensity pot (the original had it after) and it might not even be necessary at all. But better safe than sorry.



7 comments:

  1. You can mark this one as verified. I built the pcb and I like it a lot. Great sounding fuzz. Once again thanks for the layout!

    ReplyDelete
  2. Any idea of how is designed the tone control in the new version? I'll try the BM tone stack.

    ReplyDelete
    Replies
    1. Answer to myself, maybe it help somebody :-)
      I found out on the net that the tone pot in the new version is a simple treble roll off control.
      BMP tone stack would be a better choice I guess.

      Delete
  3. Is 1N5819 a good substitute for BAT46?

    ReplyDelete
    Replies
    1. Not really. But just about anything will work there. Socket and experiment with what you have

      Delete
  4. YoBit lets you to claim FREE CRYPTO-COINS from over 100 unique crypto-currencies, you complete a captcha one time and claim as many as coins you need from the available offers.

    After you make about 20-30 claims, you complete the captcha and continue claiming.

    You can press CLAIM as many times as 50 times per one captcha.

    The coins will held in your account, and you can convert them to Bitcoins or any other currency you want.

    ReplyDelete
  5. tried to use Ge for Q2Q3-any chances for good sound! Silicon-good.

    ReplyDelete