This is a library of perfboard and single-sided PCB effect layouts for guitar and bass. I'm not an electrical engineer by any stretch of the imagination, just a DIY'er who likes drawing layouts. It is meant for the hobbyist (so commercial use of any of these layout is not allowed without permission) and as a way to give back to the online DIY community.

Saturday, March 21, 2015

D*A*M Meathead

I realized after posting the Meathead Deluxe I hadn't made a layout for the one-knob Meathead. Anyway, the Meathead is one of most well known 1-knob silicon Fuzz Face variants, thanks to the like of Josh Homme from Queens of the Stone Age, among other guitarist. Q2 is a BC182L, which has an ECB pinout instead of the more common EBC, so be careful of that.


8 comments:

  1. havent been able to make this one work, got any link to the schematic ?

    ReplyDelete
    Replies
    1. Think I used this schem

      http://2.bp.blogspot.com/-K2kZ3PF-0B8/TxyNt4la7kI/AAAAAAAAArA/VwLBebGGKQ4/s1600/Dam_Meathead.gif

      You using a BC182L for Q2 or something else? It's laid out for ECB instead of EBC there.

      Delete
  2. I built this on a pref board and could not get it worked, thanks dtgehring of your comments. Looks like it could be a problem from the Q2 layout, I will check it against the schematic later and will share my findings with you all. Hope I can get it worked after the checking. Thanks.

    ReplyDelete
  3. I re-checked my BC182L with my multimeter and found that the pinout order is in CBE (not same as your layout), I do not have a clue about this. Anyway, I twisted the pinouts and got it installed and the pedal works! Thanks again.

    ReplyDelete
  4. Can you make this layout with Q2 E-B-C? In my country i can't found BC182. Thanks.

    ReplyDelete
  5. Si funciona solo hay que fijarse en los pin del transistor lo hice con 2 npn

    ReplyDelete
  6. Hi!
    Just built that thing and it sounds really freat but..
    Volume control acts like gain control in my case. Can anyone tell me where should I troubleshoot?

    ReplyDelete