This is a library of perfboard and single-sided PCB effect layouts for guitar and bass. I'm not an electrical engineer by any stretch of the imagination, just a DIY'er who likes drawing layouts. It is meant for the hobbyist (so commercial use of any of these layout is not allowed without permission) and as a way to give back to the online DIY community.

Thursday, June 4, 2015

Devi Ever Torn's Peaker

The Devi Ever Torn's Peaker is a versatile dirt box, ranging from smooth and crunchy at low gain settings, to thick distortion/fuzz tones as the texture control is increased. The Torn's Peaker is very close to a couple other Devi circuits (Aenima, US, and Never Drive) and it only takes a few modifications to get the Torn's Peaker to the other circuit specs. Here's the schematic from Freestompboxes.org showing the differences between the 4 circuits, and the modifications are listed in the layout image below.








at
Labels: , , ,

2 comments:

  1. rickstMarch 5, 2016 at 9:35 AM

    Thanks for the layout. I've built it but I'm getting lot's of noise, when volume is at max the noise is somewhat reduced (grounding?), also when I move the texture I get some silence for a while. I already reviewed everything, any ideas on what might be wrong?

    ReplyDelete
  2. BedrockTonyAugust 10, 2019 at 4:14 PM

    Hi! just build this today and it is working pretty well. The only problem i have is noise when the texture pot is maxed out or at 0 (no idea why). Also i socketed Q2 because i ran out of mpsa18's. Now using a 2n3904, which i think is good, i like this pedal with a little less gain.

    Boxed it and put it on my board. Thanks for the layout!

    ReplyDelete

Subscribe to: Post Comments (Atom)