This is a library of perfboard and single-sided PCB effect layouts for guitar and bass. I'm not an electrical engineer by any stretch of the imagination, just a DIY'er who likes drawing layouts. It is meant for the hobbyist (so commercial use of any of these layout is not allowed without permission) and as a way to give back to the online DIY community.

Wednesday, October 30, 2024

Marshall Shredmaster

 Here's another old layout redone for all you Jonny Greenwood fans. I think the old layout was based on an old and incorrect schematic (here's the schematic used for this layout), but this one should be right and a much easier fit in an enclosure than the old one. 




Friday, October 4, 2024

Roger Mayer Axis Fuzz

For Fuzz Friday here's the Roger Mayer Axis Fuzz redone with board mounted pots. Schematic for reference. Didn't make a drill template for this one, but the pots are 1.2" apart and should be an east fit in a 1590B.