AnalogMan Sunface

 Happy Fuzz Friday! Been meaning to redo this one for a while with board mounted pots. A buddy of mine was reminiscing about a Sunface he used to own and wish he still had, so I built this with some OC71s for his 40th b-day. AnalogMan has used loads of different transistors in these over the years, both germanium and silicon, so socket and experiment. Easy fit in a 1590B.

Roland AF-60 BeeGee

Happy Fuzz Friday, all. Somehow in 10 years of laying out fuzzes, I've never done this one. Here's the  Roland (pre-Boss) AF-60 BeeGee fuzz. Originals use semiconductors you probably don't have in your parts stash, but nothing in mojo territory, so modern equivalents will work just as well. Fairly simple circuit with a couple transistor amplifiers, an opamp stage, hard clipping, and a BMP-style tone stack. Here's the schematic for reference. Easy fit in a 1590B. (Transfer image in the Boss folder)

Roger Mayer Axis Fuzz

For Fuzz Friday here's the Roger Mayer Axis Fuzz redone with board mounted pots. Schematic for reference. Didn't make a drill template for this one, but the pots are 1.2" apart and should be an east fit in a 1590B.

Reeves Electro Zo:

Stumbled across this one I though would be a quick Fuzz Friday layout. It's a modified Zonk 2 with silicon transistors. Originals use NOS 2N3416, but other low hFe (150-200) BJTs should work just fine (2N2222, 2N5550, etc). Laid it out so the board would be vertical in the enclosure with the pots attaching to either side of the board. Schematic for reference.

EQD Fuzz Master General

 Happy Fuzz Friday! Here's a Univox Super Fuzz derived circuit from Earthquaker. Should squeeze into a 1590B just fine. Here's the schematic for reference:

JPTR FX Silver Machine

Happy Fuzz Friday, folks! Stumbled across this one recently and looked cool. It's basically 2 SHOs in series pushing a Green Ringer. Schematic for reference. Should fit nicely in a 1590B. I've also got a fabricated version in the store.

EHX/JHS Lizard Queen

 Happy Fuzz Friday everyone! You probably didn't miss this collaboration between Josh Scott and Mike Matthews, and because of the old school style of the big box version, it wasn't to hard to trace. There's still a few things we don't know about the circuit, so have your sockets handy if you put this together (see notes below). There's some debate over the touted originality of the circuit, as it appears to be a Bazz Fuss into a Tim Escobedo PushMe PullYou, but do your best and leave that discussion to the forums. FSB trace thread for reference.

Notes:

• Q1 is a large can (TO-39 by the looks of it) transistor. I doubt it's germanium, so I assume it's something relatively low hFE like a 2N1711. I'd try out 2N2222A, 2N3904, 2N5550 and see what works/sounds best. The transistor types listed in the layout are an assumption based on the PushMe PullYou.
• D1 appears to be old stock of some sort, with orange and green color bands. I would assume a 1N4148 will work just fine here like in a typical Bazz Fuss.
• C1 is a small ceramic cap, value unknown. I'd start experimenting with anything between 100-470p.
• The 10uF cap off lug 2 of the Balance pot is an assumption based on the PushMe PullYou. It could be as large as 100uF as it's the same size axial capacitor in the original as the power filter caps.

Suhr Rufus Fuzz

Happy Fuzz Friday, everyone! Hope everyone is having a good end of the year and holiday season.

Here's the Suhr Rufus Fuzz. If you ever wanted a Fuzz Face with an input buffer and big ol' ton stack at the end, this would be right up your alley. Here's the schematic for reference. Should be able to squeeze it into a 1590B.

Solid Gold FX Rosie

 Happy Fuzz Friday, all! Here's a cool silicon Tone Bender style fuzz from Solid Gold Fx. Aside from using silicon transistors, the first stage is a JFET. When the switch is closed it adds in a 4.7uF input cap in parallel with the 330pF input cap. You could replace the switch with a B100k pot (lug 1 to Sw1 pad, lugs 2-3 to Sw2 pad) to blend the two values. Set the trimmer to 4.5v for the JFET and adjust by ear as needed. 

Ghost of Kyiv

 Happy Fuzz Friday, everyone! Here's a very cool Big Muff variation designed by Zzoyd. Zzoyd lives in Kyiv and named the circuit after the famed fighter pilot defending the Ukrainian skies from Russian aggression. It reminds a bit of the Musket but with a 2-band EQ and a germanium pre section. Should fit nicely in a 125B. 

Darkglass Duality Fuzz

 Happy Fuzz Friday! Here's a big one that hopefully makes up for my absence lately. Sounds great on bass and guitar. From Darkglass:

The Duality is a unique fuzz pedal that contains two discrete fuzz circuits—a gated saw-tooth wave and a raunchy high-gain sound—which can be mixed together to yield a vast selection of distinct sonic textures.

Not A Muff

Happy Fuzz Friday, all! Recently I got a request for the new EQD Hizumitas. Found a schematic for it over on FSB and it's just a BMP. The values are tweaked, but the topology is the exact same as a standard Muff. If you've hung around here for really any length of time you know how many times I've laid out the BMP. There are so many clones out there dating back to the early 70s, most of which I haven't really explored here on the blog. So using Kit Rae's fantastic Big Muff site, I put together a BOM of 6 versions of non-muffs, including the Hizumitas and the Elk Sustainar the Hizumitas is derived from. So for your building and experimenting pleasure, here's the Not A Muff. (BOM, schematic and drilling templates linked below)

Build Doc

Also, if you're interested in how I laid out this board, I did a livestream over on YouTube. I've been trying to do a couple streams a month of just chilling and doing some layout work in Eagle. So go and sub and all that nonsense.

Devi Ever Hounds Tooth

 Haven't had a Fuzz Friday since March, so sneak one more into 2021 with the Devi Ever Hounds Tooth. It's essentially Devi's 05 clean boost into a Dark Boost with extra PNP transistors stacked onto the NPNs. 

Grind Customs FX Ultra '78

 Happy Fuzz Friday, everyone! Here's a cool take on the IC Big Muff by JuanSolo and Grind Customs. It's essentially the '78 IC Big Muff with the tone bypass switch with the tone stack from the Ultrastoner. Should be able to squeeze it into a 1590B. 

Catalinbread Karma Suture

 Happy Fuzz Friday everyone! This one recently got traced on the Aion blog (so go check out the full write up over there for more info and schematics). The Karma Suture is based on the Harmonic Percolator and has come in both germanium and silicon versions. The difference between the two are just a couple value changes, so you can build either version on the same board. Value differences are outlined below.

 

Mid-Fi Electronics Random Number Generator

 Happy Fuzz Friday, all! Here's a fun noise maker that should go together pretty easily. Schematic for reference.

German Tooth Fuzz

If you've got a bunch of NPN germanium transistors kicking around, this Fuzz Friday's for you. Here's Zzoyd's adaption of the Basic Audio Spooky Tooth for use with germanium transistors. The first 2 stages each use 2 germaniums in a Darlington pair, with the 3rd stage using either a 2N7000 MOSFET or an NPN silicon transistor (pinout is CBE on Q5 if using a BJT in place of the MOSFET). Trimmers are for biasing the Darlington pairs, so adjust till it sound right to you.

Frantone Lo-Tone Classic Fuzz

Here's an interesting one from Frantone for Fuzz Friday. Think the first half of a Big Muff into an LM386. Schematic over on FSB here.

Boss FZ-2 Hyper Fuzz

Happy Fuzz Friday everyone! The Hyper Fuzz is Boss's take on the Univox Super Fuzz with a load of modifications. Schematic for reference here. Fits nicely in a 1590BB.

JSA MUR Fuzz

This week for Fuzz Friday here's another design from JSA. It's a Fuzz Face variant, with additional controls and an additional gain stage at the end. Should squeeze into a 1590B.