Tuesday, March 31, 2015
Skreddy Mayonaise MkIII
One of the higher regarded Big Muff derivatives out there, the Mk III is Skreddy's latest version of their Mayonaise BMP. On the board is a dip switch which allows you to switch in or out 2 extra capacitors to the tone section. You could wire these as external SPST switches (you'll need 2 of them) if you like. I used my Triangle Big Muff layout as a starting point, but there are several changes so the two aren't interchangeable. But like the Triangle layout, this one is designed for solder-side mounted right angle pots and should fit just fine in a 1590B.
Subscribe to:
Post Comments (Atom)
You can tag this!
ReplyDeleteno drill template by any chance?
ReplyDeleteJust added one for you. Check the dropbox
Deleteyour the best, thank you!
Deletehow exactly would i make the internal dip switch into twp external toggle switches?
ReplyDeleteUse two SPST switches and wire one to the left 2 set of pads for the DIP switch and the other to the right 2 set of pads.
DeleteDid the drilling template get deleted? I only see the Skreddy Fuzz Driver and Top fuel now.
ReplyDeleteAny chance someone knows what the difference is between this and the Zero? I have been looking for info on the Zero and not finding much.
ReplyDelete