This is a library of perfboard and single-sided PCB effect layouts for guitar and bass. I'm not an electrical engineer by any stretch of the imagination, just a DIY'er who likes drawing layouts. It is meant for the hobbyist (so commercial use of any of these layout is not allowed without permission) and as a way to give back to the online DIY community.

Friday, February 24, 2017

Lovepedal Dragon, BBB, etc.

Here's YAFF (yet another Fuzz Face) for Fuzz Friday. This is the basic circuit for many Lovepedal variations of the classic fuzz using both germanium and silicon transistors. If using PNP transistors whether germanium or silicon, be sure to flip the the polarized components, etc. Here's the schematic the layout is based on.


7 comments:

  1. Buenisimo! Q transistores puedo usar?

    ReplyDelete
    Replies
    1. From the schematic, the original uses PNP Germanium. I would assume the usual advice to socket and try different transistors out applies here.

      Delete
  2. thanks for posting the layout. i just building & testing this one and it's awesome! i used a 1N2222A (sil/hfe 194) for Q1 and a 2N1306 (germ/hfe 143) for Q2. it also sounded great with two 2N1306's, but the silicon was a little brighter. you can verify it NOW!

    ReplyDelete
  3. thanks for the great layout..by the way,,what type of DC jack should be used? Switched or Non- switched?

    ReplyDelete
  4. A non switched one will work if you're not including a battery, otherwise use the switched.

    ReplyDelete