This is a library of perfboard and single-sided PCB effect layouts for guitar and bass. I'm not an electrical engineer by any stretch of the imagination, just a DIY'er who likes drawing layouts. It is meant for the hobbyist (so commercial use of any of these layout is not allowed without permission) and as a way to give back to the online DIY community.

Monday, April 11, 2016

Wampler Faux Analog Echo

Today's layout is Brian's take on the PT2399-based delay. It's similar to many other PT delays, but is it's own beast. It can do anything from simple slapback delay to up to around 500 milliseconds of delay. I've laid it out for board mounted pots and it would be a snug fit, but i'll fit in a 1590B (especially if you use low profile jacks).


62 comments:

  1. aha! finally leviathan showed here!
    David, are you know how to add switch between tail and true bypass in this board?

    i build my own version with all board mounted pots and led (almost) like a dead copy!

    https://1.bp.blogspot.com/-B-M6Xw0BAOA/VwytmUWAqbI/AAAAAAAAAO4/VLMfOTbjXDwIFqh6KE5f32f_HR2a8M4WwCLcB/s1600/leviathan-perf.png

    i built with cheaply monolytic caps, sound not good as panasonic ECQ, so i not boxed it before ecq arrived. and want try your layout. Delay Junkies isn't crime, right? hehe

    Hail Sofa Car Effects!

    and lastly, we (me and my friend) want to build perf layout site. are you cool if we listed your site in exhange backlink?

    a noob perfman
    Febri

    ReplyDelete
    Replies
    1. Here's where you'd put the tails switch

      http://postimg.org/image/k2mwhtddx/

      Feel free to link to my site. Good luck!

      Delete
    2. Wait, how does the tails switch work? Sould i wire it like tails and when the switch is off its TBP?

      Delete
    3. I think I messed up where the tails switch should go in the pic I posted earlier. It should be just to the left of the 1µF cap at the bottom of the board. If it were me, I'd forgo true bypass and just do the tails switch. The buffer design in this is very good and won't color your tone. But if you still want TB, something like this would work:

      http://4.bp.blogspot.com/-UOCCeDnvgpg/Uqi8wM-_J6I/AAAAAAAACTQ/QdSa3gtekIs/s1600/tails+-+true+bypass+MOD+for+DBD+scaled.jpg

      Delete
    4. I'm working into this right now.

      Can anyone explain more detailed how I have to do this add?

      Thanks!

      Delete
  2. Leviathan is not an exact copy of Faux Analog Echo. Brian did change some capacitor values and instead of repeat pot > resistor > capacitor order of connection he changed it to repeat pot > capacitor > resistor.

    I have built this version http://2.bp.blogspot.com/Bv4qmgsFmDs/VcpGO9h_GvI/AAAAAAAAFFY/5DPbXskXsvg/s1600/Wampler%2B-%2BFaux%2BAnalog%2BEcho%2BDelay%2Brev2.png based from the schematic posted here http://www.freestompboxes.org/viewtopic.php?f=7&t=22509&p=228891&hilit=faux+echo#p228891

    I've used cheap green mylar capacitors and ordinary ceramic capacitors for smaller values and I like it. For me it is better than my deep blue delay build with more expensive box type film capacitors (what a waste).

    I'll try building Brian's version (Leviathan) and test/check how it differs from my first build.

    ReplyDelete
  3. Hello, excelent project! I build this pedal, but i have a question, the transistor (O-G-I) is???

    ReplyDelete
  4. Built it and it works.
    Mark it verified.

    ReplyDelete
  5. Checked. With so many details, the most terrible, what can go wrong. But when the night started and it works a lot of joy. Thank you for the excellent work !!!

    ReplyDelete
  6. The pedal works. However, the repeats are very less (4 to 5 @ max) and when sustained notes are played the delay is drowned or suppressed. Is there a workaround to this. Again amazing blog. Thank you for your support.

    ReplyDelete
    Replies
    1. Same here. Level knob not going above 30% of the original signal and feedback never goes further than 4 audible repeats.

      Delete
    2. I thought that I did something wrong too... The echo seems very low and i can only get about 3 - 4 repeats and if you are still playing the repeats disappear in the mix... is there some way to raise the level of the repeats... I have also notice that if the pedal is used after a fuzz, all the tone of the fuzz is completely removed...

      Delete
    3. I just finished this one, and the same stuff happens! There are like just 3-4 repeats, and the delay time doesn't seem to work at all...

      Delete
  7. This comment has been removed by the author.

    ReplyDelete
    Replies
    1. https://postimg.org/image/dk1onvhwp/

      Delete
    2. This fixed the low repeats issue and now it self-oscillates nicely. Thanks julungas!

      (Increase the 12k resistor that goes to pin 15 of the PT2399 to 47k)

      Delete
    3. Thanks Julungas!
      I have to use 100k resistor...smaller values didn't do the difference.

      Before it didn't a good sound quality, volume and repeats very low.

      Is that 12k resistor right in the layout?

      Delete
    4. What did u do to fix it..? Link is broken

      Delete
  8. Has anyone successfully added a mod board?
    tails switch?

    Bit of a newbie so id really appreciate all details if possible. Thanks!

    ReplyDelete
    Replies
    1. I did add a mod board Alex suggested for the Leviathan over here:
      http://tagboardeffects.blogspot.tw/2016/02/madbean-leviathan-wampler-faux-analog.html

      It is this board:
      "Also, this Mod Daughterboard from Mark might work:"
      http://tagboardeffects.blogspot.fr/2014/04/grind-customs-fx-deprofundis-delay.html

      It works but seems to need some tweaking. As long as modulation switch is off the Delay works exactly like if no mod circuit was connected. As soon as you turn modulation on delay time gets a little out of control. Seems to have to do with the fact that modulation only works upwards, i.e. modulation can only shorten delay time. Sounds great though. I might try the other circuit Alex suggested later:
      http://www.sabrotone.com/?attachment_id=702

      Delete
    2. This might actually be how the circuit works. It turns the delay into a chorus-like effect and not plain delay time modulation (what I was assuming)

      I swapped it with this circuit and it works and sounds great, exactly the way I wanted
      https://goo.gl/zcx9Qe

      Delete
  9. Another question, where do I find the components (RC?) for the high pass filtering of the feedback if any? I'd like to add a switch that changes the high pass cutoff for more flexibility. Thanks in advance

    ReplyDelete
  10. What kind of caps is those 1uf?

    ReplyDelete
  11. I have to swap one 12k for a 100k resistor: the one that goes to pin 15 of the PT2399.

    Before it didn't a good sound quality, volume and repeats very low.

    Is that 12k resistor right in the layout?

    ReplyDelete
  12. I have difficulty finding 68nf and 150 nf caps. Would it be okay to do in series 2 33nf (66nf) and 100nf+47nf (147nf)

    ReplyDelete
    Replies
    1. It's fine to combine caps, but you'll need to run them in parallel, not in series.

      https://www.allaboutcircuits.com/textbook/direct-current/chpt-13/series-and-parallel-capacitors/

      Delete
  13. hello! sorry for my newbie question. are there 2 inputs and outputs? or what does it mean 2 points next to in and out on schematic? thanks!

    ReplyDelete
  14. Hi! Will this effect and "Wampler Faux Spring Reverb" work with line level signal? I'm building a synthesizer, and would like to add this board to the synth.
    If not, maybe there is a way to swap some parts to make it work with line level signal?

    ReplyDelete
  15. They will probably need some modification. Check this out: https://www.soundonsound.com/sound-advice/q-how-to-hookup-guitar-pedals-to-synth-or-keyboard

    ReplyDelete
  16. Hi!!, At least, how many voltz minimun to capacitors?

    ReplyDelete
  17. Hello, I'm experiencing big popponp noise when turning the pedal on or off, I added higher pulldown resistors but no lucl,I'm using iviark's dpdt layout , no input grounded, also I disconnected the led, same problem, any suggestions?

    ReplyDelete
    Replies
    1. Good info here from Mr. Black:

      https://www.mrblackpedals.com/blogs/straight-jive/6629778-what-really-causes-switch-pop

      Delete
  18. Thank you, this pop thing is my nightmare latelt,I haven't had aimilsi problems before, great sounding pedal ,I appreciate the work you put into this

    ReplyDelete
  19. The pot on delay increases as I turn the knob counter clockwise
    If I change it to 50kC can it be turned clockwise?
    Thanks! nice delay sounding

    ReplyDelete
  20. hello, do you have any advice on how to modify the pedal?
    more volume
    add potentiometer for speed mod
    add mod deepth potentiometer
    in short, like making it become like a TES cornish

    ReplyDelete

  21. Good afternoon. How do I make it more acute and more serious in Tone's account?
    Thankful.

    ReplyDelete
  22. a greeting to all, how could I add the repetition led blinker? Thank you in advance

    ReplyDelete
  23. This comment has been removed by the author.

    ReplyDelete
  24. Hi I have a problem with this pedal. When the effect is on, only the clean sound comes out, no sign of life from the potentiometers and the 78L05 gets very hot. I checked components and connections and everything seems ok. Any tips?

    ReplyDelete
  25. Hello, Im having trouble finding a 680pF and 5pF capacitors. The closest I was able to find are 1000pF and 10pF. Can I use these instead or it have to be the exact value?

    Regards.

    ReplyDelete
  26. I wonder if it's okay to use 100uF caps instead of the 200uF ones. Thanks!

    ReplyDelete
  27. I set up other schemes on this blog and they all worked. Except this one. There is no sound. The pedal is muted. Some help? I've checked the trails and everything is ok

    ReplyDelete
  28. It worked!! I just cleaned the circuit. I liked the pedal so much that I'm going to sell my tc flashback. For those who are in doubt about the schemes of this blog, this one is much better than disaster transport jr, even though they are similar ideas. The tone pot works. thanks

    ReplyDelete
  29. Really interested in trying this one out but I'm just getting my head around the unusual component values. Pretty new hear so wondering about exchanging them with near valued parts. For instance -

    470k instead of 511k
    10k instead of 12k
    20k instead of 22k

    That'll work, right?

    Thanks for looking in.

    ReplyDelete
  30. I made this on my bread board , this is one really nice sounding Delay pedal . just perfect. i might try to put two of these in one enclosure to get those stacked delay sounds.

    ReplyDelete
  31. Successfully made this one, but reading from another source, and yes, Tone pot seems did not do anything.

    ReplyDelete
  32. Built it, fired up immediately. Pretty great sounding delay! wish the delay times were a little longer, but I think this build sounds better than the disaster transport vero layout I did.

    ReplyDelete