This is a library of perfboard and single-sided PCB effect layouts for guitar and bass. I'm not an electrical engineer by any stretch of the imagination, just a DIY'er who likes drawing layouts. It is meant for the hobbyist (so commercial use of any of these layout is not allowed without permission) and as a way to give back to the online DIY community.

Wednesday, August 12, 2015

Little Angel Chorus

Here's a simple, fairly low parts count chorus based around a PT2399, designed by Rick Holt (aka Frequency Central) from the DIYStompboxes forum. I've drawn 2 versions, one with board-mounted pots, and one off-board pots. The 2nd IC (NE5532 in the layout) can be any dual op-amp (a TL072 works well), just socket and experiment. The board is fairly large, so you might want to use long leg right angle PCB mount pots and mount them from the component side to save space. Here's a quick sound sample.




74 comments:

  1. Hi,

    The PCB on the top - the second pins of the parts from 6,7,8 pins of "PT" must go to ground.

    Verifed

    reg.
    Martin

    ReplyDelete
  2. I Builded this pedal but doesn't work!!!

    ReplyDelete
  3. The second pcb says that depth 1 and speed 1 are not connect, but the first are connected.

    ReplyDelete
    Replies
    1. Either way will work the same. They're just being used as variable resistors and either method is acceptable.

      Delete
    2. Maybe my ic doesn't work. Thanks.

      Delete
    3. I found error in my pcb, i fixed and works great. Very nice pedal, thank for Effects Layouts!!!

      Delete
    4. Hi Could you please share what the error was? If it was a common one

      Delete
  4. I build this, its working, but the depth is like not many effect, somebody can modified for the depth ?

    ReplyDelete
  5. Is there any replacement for the pt2399? I cant find it anywhere

    ReplyDelete
    Replies
    1. Afraid not. It's a really common chip though now. I got 50 of them off eBay for like $10 US.

      Delete
    2. Emilio - try HT8970 as a substitute

      Delete
  6. yeah I figured it would be plenty of those around since it is a pretty popular pedal in the diy community here (argentina) I guess it is just bad timing with the stores stock. Thanks anyway!

    ReplyDelete
  7. Simple good chorus, vibrato tone there. Slightly lacks depth, but in general everything is great. Thank you very much. Checked with the LM4558, jrc4558,LM833,TL072.

    ReplyDelete
  8. which of the layouts work ? The first or second

    ReplyDelete
  9. I try this pcb, it's working. But, i get many hiss in sound :(

    ReplyDelete
  10. I did it today, very good Chorus, not better than Small Clone, but you can have a nice tone. Thanks!

    ReplyDelete
  11. I try to build this Chorus. It's working ! But, the hiss sound "sssssssssssss" very big. :(

    ReplyDelete
    Replies
    1. I have the same. what is the solution?

      Delete
    2. Try replacing the PT or up the value of the power filter cap.

      Delete
  12. This comment has been removed by the author.

    ReplyDelete
  13. Board mounted PC works great. However I did have a failed IC which caught me out for a few mins! I'd post a picture but can't work out how.

    ReplyDelete
  14. Perfect chorus, perfect sound for soloing and some clean tones too. First I tried with Entropy chorus which seemed more interesting, but after two tryings I did this design at first attempt. Great job!!! Nice PCB layout!!! Greetings from Balearic islands!!!

    ReplyDelete
  15. Note: I don't know why but it sound better with TL072 than 4558, less effect... our maybe less gain, but I kept 072 ;)

    ReplyDelete
  16. I built it for three times, but i got same problem. it work but sometimes doesnt work. what the solution?

    ReplyDelete
    Replies
    1. i faced similar type of problem with a Delay pedal made with PT2399.
      Probably its the same here. Try different PT2399

      Delete
  17. Built this today, I am getting sound through the effect but no chorus effect. Went through and triple checked component values and traces for errors, couldn't find any. Has anyone else experienced this problem? Any idea where to go from here?

    Power is checking out at all locations, getting 5v at the regulator, op amp is working fine, clean signal comes through but no chorus effect. :/

    ReplyDelete
    Replies
    1. Me too. Same problem. Passes signal, but no chorus effect, just some unwanted gain...

      Delete
    2. The same problem.. any of you can resolved this?

      Delete
    3. I can't speak english.
      But you can translate my instruction word by word. I hope you understand what i mean.

      "IC PT2399 tidak semuanya sama. Saya membeli IC PT2399 ditoko yang berbeda. Keduanya berfungsi dengan baik. Hanya saja, salah satunya tidak bisa dipakai untuk efek chorus. Saya telah memasang socket di papan efek saya untuk test IC. Agar saya segera mengetahui manakah IC yang berfungsi dan manakah yang rusak"

      Thank you very much. Sorry for my english

      Delete
  18. Did you know any mod to increase the Depth of the effect?

    ReplyDelete
  19. In the onboard pots PCB, the "Underside (reversed) image is not mirrored.

    ReplyDelete
  20. I've build this today.
    Only problem is the output is amplified and distorting,
    And it has no high frequencies in it.
    Checked component values and traces.
    If i pull out the PT2399 it sounds fine but no effect.
    Tested with multiple IC's

    ReplyDelete
  21. can i make a request for a daughterboard of this chorus to solve the lock ups of PT2399 and its pin outs?

    ReplyDelete
  22. and also can i request for the little angel chorus with lock fix and noise reduction measures from rick holt's design? extra pad for space/warbler switch and chorus/vibe switch? thanks and more power..

    ReplyDelete
  23. Hello,

    How could I add a volume pot at the Little Angel circuit ? Is it possible to do just changing some resistor by a pot ?

    ReplyDelete
    Replies
    1. You could just tack on an A100k pot to the output. Lug 3 to the out pad, lug 2 to out, lug 1 to ground.

      Delete
    2. It´s a good idea, however this A100K pot to the output will not be only a volume attenuator ? I mean, I would like to control the unity gain of the circuit.

      Delete
    3. So, to Adjust the volume (unity gain), the output volume must to be (very) higher when the pot is rotated clockwise in the maximum position.

      Delete
    4. Try adjusting the value of the 1M resistor by the 5532. Or make that a trimmer/pot.

      Delete
  24. This comment has been removed by the author.

    ReplyDelete
  25. when I turn on the pedal the overall volume goes down...can you help me?

    ReplyDelete
  26. Hi , modificando la resistencia de 33k próxima al pot de depth podría aumentar o disminuir la depth ? Es necesario aumentar la depth un poco más

    ReplyDelete
  27. I build the second layout, but there is no effect, only a volume lotion.
    I replaced PT, NE5532 and 7805 ... What do I do? Can you help me?

    ReplyDelete
  28. I did the second layout and it worked very well. nothing inverted or bad; it would be interesting to have more depth. and about the sound, it is perceptible to be based on a delay circuit, sometimes it sounds like a metal echo / delay. brazil vibrations.

    ReplyDelete
    Replies
    1. ps: nice chorus, nice effect, nice layout, thanks!

      Delete
    2. fala aí, td bm? eu fiz um com o segundo layout e funcionou, troquei o resistor 33k por 100k e melhorou o volume com efeito ligado, deixo a dica caso tenha tido este problema tb de volume baixo quando ligado. Semana passada fiz outro tb com o segundo layout, porem este nao funcionou, o som passa clean...ja chequei trilhas, pots e chave.....teve este mesmo problema tb?

      Delete
  29. I've built 3 and all of them work great. i use 1st PCB. Thanks to Effects Layouts :)

    ReplyDelete
    Replies
    1. did you build yours using 5532? i did mine with tl072..because 5532 are not easy to come by here in philippines

      Delete
  30. greetings from philippines..can i request the GLAM CHORUS layout? thanks in advance :)

    ReplyDelete
  31. can i requeat GLAM CHORUS in perf board layout? i really love building using perfboards..thanks for your effort,great site by the way..have built a few effects from this site and all worked first time..and also..any way to add more depth in this LAC? it would be really nice to have more depth to this..thanks a lot..greetings from philippines..

    ReplyDelete
  32. how can i fix distorted chorus sound...thank you

    ReplyDelete
  33. distorted output problem please help

    ReplyDelete
  34. I tried the first board when the effect is on the guitar signal went through but no chorus effect. what to do?

    ReplyDelete
  35. without any kind of modifications the first plate should work ??? greetings from Argentina

    ReplyDelete
  36. It is heating too much

    I didnt heat this much in deep blue delqy.

    ReplyDelete
  37. Got two diy chorus already( mxr micro chorus and p dimension chorus).
    And im going to build this one for sure just to compare them in terms of output responses.
    Tnx guyz and more power!!

    ReplyDelete
  38. Hi to all. I build first version (with mounted pots). 1 of 7 PT2399 i bought wasn't hot after turning on (so only one was good ;) ). Power supply is very simple bench supplu 24v module down do 9V (very noisy but for tests it's OK). Now the werdiest thing. When turned on, only clean signal with mearly effect on pots turning. I start to mesure voltage on each pt2399 legs, and when i tuched 2 leg (2,4v or pin 2) i heard some kind disortion (click) on amp (3W, battery supply Orange Micro Crunch) and effect starts to work . Until power off. Power On, and no effect again, until i touch 2 leg (or solder joint, or even second end of path - before 33K) with something metal (isolated on end, to prevent body interfer) , then disortion click sound on amp and everything starts working perfect. I don't use any force, just light touch is enought to start effect to work.
    I'm electrician, i build electronics for fun, and i known how to solder, I checked all joints 3 times, checked all elements. Can enyone can tell me what is going on ?? is pt2399 broken ?? I have only one working so I can't check it. I have PT on stand , and i check it for connections and its OK. Can enyone can help me with this ??

    ReplyDelete
    Replies
    1. Hello! I have the same problem. Have you solved it? do you have a piece of advice?

      Delete
  39. This comment has been removed by the author.

    ReplyDelete
  40. This comment has been removed by the author.

    ReplyDelete
  41. How would I get more depth?
    thanks.

    from chile

    ReplyDelete
  42. How are you friends, for those who have not worked or changing the ic pt2399 there is a solution, which is to place a 10nf capacitor from pin 2 of the ic to the negative, for some reason most of the ic they sell are blocked but Making this arrangement works 100% and I already tried several ic that I had discarded thinking that they were damaged but when adding the capacitor they worked

    ReplyDelete