This is a library of perfboard and single-sided PCB effect layouts for guitar and bass. I'm not an electrical engineer by any stretch of the imagination, just a DIY'er who likes drawing layouts. It is meant for the hobbyist (so commercial use of any of these layout is not allowed without permission) and as a way to give back to the online DIY community.

Thursday, August 20, 2015

Boss SD-1 SUPER OverDrive

Since the Zakk Wylde overdrive from last week was based on the SD-1, I figured I might as well go ahead and lay that circuit out as well. This doesn't have Boss switching so you can wire it up for true bypass. I've added some extra pads around D3 if you want to change that to a germanium (which seems to be a fairly common mod to this effect).




9 comments:

  1. You have removed the output buffer, this output buffer is used to smooth add a top high

    ReplyDelete
  2. Hi, can i use 2n5088 or Bc550?

    ReplyDelete
  3. Hi, i bought an ic an4558, shuld work fine? Or I must to buy an jrc4558d? Sorry for my bad inglish i'm from argentina and i'm a noob in this.

    ReplyDelete
    Replies
    1. That should be fine. Doesn't have to be the JRC. Good luck!

      Delete
    2. Thanks, and i bought a tansistor bc337 25k 348, it's that okay? Sorry for the questions but i'm a principiant, anyways thanks for answer

      Delete