This is a library of perfboard and single-sided PCB effect layouts for guitar and bass. I'm not an electrical engineer by any stretch of the imagination, just a DIY'er who likes drawing layouts. It is meant for the hobbyist (so commercial use of any of these layout is not allowed without permission) and as a way to give back to the online DIY community.

Thursday, August 20, 2015

Boss SD-1 SUPER OverDrive

Since the Zakk Wylde overdrive from last week was based on the SD-1, I figured I might as well go ahead and lay that circuit out as well. This doesn't have Boss switching so you can wire it up for true bypass. I've added some extra pads around D3 if you want to change that to a germanium (which seems to be a fairly common mod to this effect).




35 comments:

  1. You have removed the output buffer, this output buffer is used to smooth add a top high

    ReplyDelete
  2. Hi, can i use 2n5088 or Bc550?

    ReplyDelete
  3. Hi, i bought an ic an4558, shuld work fine? Or I must to buy an jrc4558d? Sorry for my bad inglish i'm from argentina and i'm a noob in this.

    ReplyDelete
    Replies
    1. That should be fine. Doesn't have to be the JRC. Good luck!

      Delete
    2. Thanks, and i bought a tansistor bc337 25k 348, it's that okay? Sorry for the questions but i'm a principiant, anyways thanks for answer

      Delete
  4. Good day sir...can i use JRC4558????

    ReplyDelete
  5. hello.. how can i wire it like a Boss pedal? i want to modify my pedal like a boss but im a newbie here..

    ReplyDelete
  6. Is there any chance of a drilling template for this?

    ReplyDelete
  7. Hola, he construido el pedal y funciona pero con bastante ruido. No se que podria ser... Les agradezco un monton, saludos!

    ReplyDelete
  8. How can i add a spdt switch to select diodes?

    ReplyDelete
  9. @Effects Layouts this looks like same drill template with DS-1, yeah?

    ReplyDelete
  10. Verified! It's work fine. Thanks a lot for sharing the pedal.

    ReplyDelete
  11. How can I add a little bit of volume up? I think it lacks volume, sorry for my poor english!

    ReplyDelete
    Replies
    1. Same problem. Did you fix it?

      Delete
    2. I tried B100k for level pot and changed 4k7 resistor for a 1k like MXRZakk Wylde... it worked better but i think I need more volume... still trying...

      Delete
  12. The overdrive seems to work, but the drive control doesn't working at all. It sounds like at full drive but there is a weird sound at the end when you let the strings ringing, like when the batteries are dying.
    Any clue on what I could have done wrong?

    ReplyDelete
    Replies
    1. Fixed it. There was a bad connection in the line that connects the pot with de diodes and the ic. Works perfect now.

      Delete
  13. Anyone confirm a drilling template?
    I'm dying to build one now.
    Thx!

    ReplyDelete
  14. At the input you have to invert positions betwen R10k and C47n or itcouldn't work. Thanks for the layout!!

    ReplyDelete
  15. Este circuito si funciona verificado.

    ReplyDelete