This is a library of perfboard and single-sided PCB effect layouts for guitar and bass. I'm not an electrical engineer by any stretch of the imagination, just a DIY'er who likes drawing layouts. It is meant for the hobbyist (so commercial use of any of these layout is not allowed without permission) and as a way to give back to the online DIY community.

Monday, July 6, 2015

Seymour Duncan Pickup Booster

The Seymour Duncan Pickup Booster offers 25 dB of clean boost with flat EQ (and it's also a line driver). It uses a combination of two NPN and one PNP transistor. Originals use BC107s and BC177s, but other transistors should work fine as well. Check out the demo video below for more info.




at
Labels: , , ,

12 comments:

  1. UnknownJuly 7, 2015 at 10:31 AM

    That's great I was lookin for it
    Thanks David !

    ReplyDelete
  2. DexterJuly 11, 2015 at 4:54 AM

    Thanks for this, been looking for this guy for a while

    ReplyDelete
  3. AnonymousOctober 5, 2016 at 1:15 PM

    hey, i wanna build this pedal but... in the dropbox, in the transfer image library,
    it's not there

    ReplyDelete
    Replies
    1. Effects LayoutsOctober 5, 2016 at 1:29 PM

      It's in the Misc folder.

      Delete
    2. AnonymousOctober 5, 2016 at 3:15 PM

      thanks :D i will build it, i was looking for this a long time ago

      Delete
  4. UnknownJuly 16, 2017 at 7:21 AM

    work but Problem Pops when switching

    ReplyDelete
  5. UnknownAugust 17, 2018 at 2:11 AM

    Potensiometer c25k logaritmis / c25k non logaritmis???

    ReplyDelete
  6. H.A.November 24, 2019 at 7:40 AM

    Hi,

    my humble little request: Any chance to get a layout for the updated version of 2015? Schematic can be found here: https://aionelectronics.com/project/photon-booster-line-driver/

    Kind regards

    ReplyDelete
  7. Zaraki1337July 31, 2021 at 1:44 PM

    what are the replacement for BC177 ???

    ReplyDelete

Subscribe to: Post Comments (Atom)