This is a library of perfboard and single-sided PCB effect layouts for guitar and bass. I'm not an electrical engineer by any stretch of the imagination, just a DIY'er who likes drawing layouts. It is meant for the hobbyist (so commercial use of any of these layout is not allowed without permission) and as a way to give back to the online DIY community.

Monday, May 18, 2015

Lovepedal/Hermida Audio Zendrive

Got a request for this one. The Zendrive is a low-to-medium gain overdrive, delivering blues to jazz tones. It has an interesting clipping section, using a combination of diodes and MOSFETs in an asymmetrical arrangement. I've drawn the layout to accommodate board mounted pots (from the solder-side) and it will fit easily in a 1590b.


42 comments:

  1. Awesome! I love this one, one of my favorite overdrives. One thing to note is that the first diode below the 1k resistor should be germanium, not a schottky. Almost all schematics for the Zen Drive shows the 3 diodes as schottky, but I had some originals on my hands and they all had this combination of 2 bat41 and 1 1n34a

    ReplyDelete
    Replies
    1. Thanks Guilherme! Thanks makes the clipping section even more interesting.

      Delete
  2. It really doesn't make a night and day difference because the fw voltages from the diodes are actually close, but with good phones or playing loud you can actually perceive a change in the compression and overall feel

    ReplyDelete
    Replies
    1. Qual deve ser 1N34A? O mais proximo do topo ou ou mais próximo do capacitor de 100p?

      Delete
  3. Hey! This was my request!
    Thanks so much for making this layout, my friend. I really appreciate it.
    I'm going to build one asap. :)

    ReplyDelete
  4. I don't know why, but I decided to check this one again, and there's two other corrections I want to point out. At least at the Lovepedal version, the IC isn't sanded, and it's a NE5532. And the volume pot is Linear, if you use Log, it does next to nothing in the first half of the rotation, and by the end of it there will be a sudden jump in volume. Been there, done that, hehehe. I'll try to verify this nice layout ASAP!

    ReplyDelete
  5. Hi,

    Can I replace the BAT41 with a BAT43? There will be much of a difference in sound? Thanks.

    ReplyDelete
  6. It's verified. I did not have much time to test it with a decent amp. so I 'm not commenting on how it sounds.
    by the way the pcb layout is a work of art. it is pure ZEN.
    thanks a lot.

    ReplyDelete
  7. hi friends, the Ic AD712 is not avaliable in my usual shops. one replace? Thx!! this place is the best for DIY lovers ; )

    ReplyDelete
    Replies
    1. You can try just about any dual opamp. TL072, NE5532, even a JRC4558.

      Delete
  8. Hi guys! I'm sorry i'm very, very beginner, so i would be very, very happy if someone can help me with linking the schematic to the pots, LED and.. the switch.. Maybe a hand-drawing will be greatly appreciated! Thank you!!
    Joe

    ReplyDelete
    Replies
    1. The pots can be wired to the board with hookup wire or if you get right angle PCB mount pots you can hard mount them to the board. Google is always your friend with things like this. But also check out the General Layout Notes tab at the top of the page. Lots of info there.

      Delete
  9. Hi, I noticed the word 'ZENDRIVE' is not mirrored on the transfer image. I only realized this after etching one.

    ReplyDelete
  10. Does the gain work in reverse? I built one using the above layout and using pcb mount pots.

    ReplyDelete
    Replies
    1. Yeah, looks like I got the pot lugs reversed when I laid this out originally. Fixed it. Thanks for catching that.

      Delete

  11. in most layouts are 3 resistors 1k and 3 resistors 10k . What is the difference for this?

    ReplyDelete
  12. Very cool nice tone ! Whats the name of your Jam track ??

    ReplyDelete
  13. I could not find diode BAT41. is there one instead.??

    ReplyDelete
  14. I could not find diode BAT41. is there one instead.??

    ReplyDelete
    Replies
    1. You can socket those diodes and try out whatever you have on hand. 4148s, 4001s, etc.

      Delete
  15. Thanks for the advice.. I will try..

    ReplyDelete
  16. Thanks for the advice.. I will try..

    ReplyDelete
  17. Maybe I'm wrong but I think the 1K resistance to the 3-tone connection should be 10K

    ReplyDelete
  18. Hello! Wonderful layout, congrats!
    What schematic did you use as reference?

    ReplyDelete
  19. This comment has been removed by the author.

    ReplyDelete
  20. It works, the drawing is good. I built a few pedals from the drawings here. Thanks for them.

    ReplyDelete
  21. Hello there! Thanks a lot for your layout. I've just finished it and it sounds sweet!

    Here is mine :)

    https://scontent-mxp1-1.xx.fbcdn.net/v/t1.0-9/72236410_10219866717569107_5447713454272020480_n.jpg?_nc_cat=104&_nc_oc=AQlNGegCQAclEzOCScIrRPJocUAB-ljpLDCADuT0VZ0VA00jvepw1zY_opVHlmRv5C0&_nc_ht=scontent-mxp1-1.xx&oh=c333b046d3efa7d4eab47f8cdc456976&oe=5E45B3D8

    ReplyDelete
  22. @Effects Layout, it’s okay to put 1M instead of 2M after signal IN on the left am I correct?

    ReplyDelete
  23. @Effects Layouts. Do you have the schematic? I Need it to test why my proyect didn't worl. Thnx

    ReplyDelete
    Replies
    1. http://4.bp.blogspot.com/_y4AYtND8Hz8/SDNHYwkDnhI/AAAAAAAAALA/WHIn40nhzu4/s1600-h/Z_drive01.gif

      Delete
  24. Hiya! Great layout for a great pedal! However, I cant get it to work properly. Something makes it distort like crazy. I cant use the voice pot at all. If I do it sounds like a dozen of metalzones smashed into one. I tried another op amp. I tried without the clipping. The intentional clipping that is. I checked my amp and everything. What could make that distortion except a transistor, op amp or diode?
    Im using the same resistors as the layout although I had to use 2x 1M instead of 1x 2M.

    Please help! 😁

    ReplyDelete
  25. This comment has been removed by the author.

    ReplyDelete
  26. Pot tone 3 connect to 3n3, tone 1.2 connect to 1k or 10k

    ReplyDelete
  27. Hi! I noticed that the resistor in tone is 10k in schematic. The correct is 1k or 10k? Thank you!

    ReplyDelete
  28. the 1k resistor going to tone 3 is incorrect, checking the used scheme I realized that it is actually correct to be a 10k resistor going to tone 3.
    great layout and very good aom, very zen!!!

    ReplyDelete
  29. I tested several ic's and the one that came closest to the zendrive sound was the 1458, I put a selection switch to change diodes where I have the stock version and a version with all germanium diodes. great pedal, it doesn't leave my set anymore, with high volumes you feel that this pedal is incredible, thanks again for your work on the blog, with this one there are already 58 pedals successfully made and I believe that a new overdrive is never too much hahaha !!!

    ReplyDelete