This is a library of perfboard and single-sided PCB effect layouts for guitar and bass. I'm not an electrical engineer by any stretch of the imagination, just a DIY'er who likes drawing layouts. It is meant for the hobbyist (so commercial use of any of these layout is not allowed without permission) and as a way to give back to the online DIY community.

Friday, June 21, 2024

Reeves Electro Zo:

Stumbled across this one I though would be a quick Fuzz Friday layout. It's a modified Zonk 2 with silicon transistors. Originals use NOS 2N3416, but other low hFe (150-200) BJTs should work just fine (2N2222, 2N5550, etc). Laid it out so the board would be vertical in the enclosure with the pots attaching to either side of the board. Schematic for reference.




at
Labels: , ,

3 comments:

  1. magus fremarJune 21, 2024 at 10:58 PM

    verified! everything works! used 2n3904 for q1 and q2 pn2222a! thank you for the layout!

    ReplyDelete
  2. Manuel MarsicobetreJune 23, 2024 at 9:56 AM

    Do you have a drilling template???

    ReplyDelete
  3. www.iconoclasta.com.brJune 27, 2024 at 10:41 AM

    built this on the breadboard and sounds great! Used 200k for Drift cause I'm out of 500k's here and 2N2222A for both Q1 and Q2

    ReplyDelete

Subscribe to: Post Comments (Atom)