Happy 2022, everyone! Here's a buffer/booster from Fulltone. Engaged it's a booster with an interesting controllable germanium soft clipping setup, and when bypassed the diodes and gain control are shorted, creating a buffer. If you're just after the boost and want to skip the buffered bypass, just ignore the two Bypass pads and wire it normally. The original uses a 3PDT still for bypass, but you should be able to get away with a DPDT (just wire the bypass pads to lugs 1 and 2 of a DPDT, LED- to lug 4 and lug 5 to ground). Discussion and schematic over on FSB.
ill try
ReplyDeleteJuliana chorus please
ReplyDeleteEQD Grand Orbiter please...
ReplyDeletemetal muff por favor?????????
ReplyDeleteGreat site, great work.
ReplyDeleteThe underside hasn't been reversed.
:)
Fixed
DeleteVerified, I put a perf board together with a tl071, socketed the diodes and it sounds good ( I must like my guitar). The diodes are subtle going to do some cork sniffing diode selection later. I also tried a cap with the diodes, seems to smooth off the highs.
ReplyDeleteThanks for verifying!
DeletePengganti dioda 1N750 dan IC AD711 apa?
ReplyDeleteWhat is the replacement for the 1N750 diode and the AD711 IC?
ReplyDeletetry 1n4732 or another 4.7 V Zener
Deleteand TL071, TL081 or similar single opamp
1n34 too =)
Deletecan i use 1N400x or 1N4148?
Deleteyes, it gives more dynamics at min of "dynamics"))
Deletesorry for my english, but i want to comment too)))
Okey thank you bro
DeleteI will try it today
This comment has been removed by the author.
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteis it verified??
ReplyDeleteIs there an annoying buzzing/popping sound?
metal muff, please....from argentina.I'm Rodrigo thanks for yours jobs.
ReplyDeleteVerficado!!! Desde Chile.....Muy buen sonido.----- Verified!!! From Chile....Very Good sound.
ReplyDeleteCan you explain me how I connect the DPDT switch please?
ReplyDeleteI read "just wire the bypass pads to lugs 1 and 2 of a DPDT, LED- to lug 4 and lug 5 to ground"
What about the lug 6 and 3? or just connecting 1, 2, 4 and 5 is enough?
Thanks!