This is a library of perfboard and single-sided PCB effect layouts for guitar and bass. I'm not an electrical engineer by any stretch of the imagination, just a DIY'er who likes drawing layouts. It is meant for the hobbyist (so commercial use of any of these layout is not allowed without permission) and as a way to give back to the online DIY community.
I traced this one a while back and created the Lawn Darts PCB over on the store from it. About time I made a perf and etch layout. If a Rangemaster and an Electra ever got together and had a baby, the Arrows would be the baby. Should be an easy fit in a 1590A with the pot board mounted.
Thanks for another great layout! This one looks like a nice daughter board to put as a gain boost before some amp in a box pedals. One question, I can see the electra in the schematic, but what makes this a treble booster, the coupling caps values?
Hello everyone, verified pedal with a 2n7000. It sounds good, with a lot of character, but I would like it to add more bass to the boost, since the impression it gives me is that it compresses the low frequencies to boost the high mids. Do you know if it is possible? or maybe it is because of using the 2n7000? thanks for your work :)
Thanks for another great layout! This one looks like a nice daughter board to put as a gain boost before some amp in a box pedals. One question, I can see the electra in the schematic, but what makes this a treble booster, the coupling caps values?
ReplyDeleteYes, tho the similarity to the Rangermaster refers more to the boost control.
DeleteVerified. Sound good. Tanx a lot! :-)
ReplyDeleteI build one and with the level cranked the volume is only slightly above unity. Any suggestions of things to try?
ReplyDeleteThanks for this!!
ReplyDelete1 - What would I need to change to lower the overall gain / dirt?
2 - If I wanted to add a volume pot - what would i need to do?
Perfect sound! Beautiful timber.
ReplyDeleteHello everyone, great Booster!
ReplyDeletebut if you swap "+" and "1" then LPF will work))
good
DeleteHello everyone, verified pedal with a 2n7000. It sounds good, with a lot of character, but I would like it to add more bass to the boost, since the impression it gives me is that it compresses the low frequencies to boost the high mids. Do you know if it is possible? or maybe it is because of using the 2n7000? thanks for your work :)
ReplyDelete