This is a library of perfboard and single-sided PCB effect layouts for guitar and bass. I'm not an electrical engineer by any stretch of the imagination, just a DIY'er who likes drawing layouts. It is meant for the hobbyist (so commercial use of any of these layout is not allowed without permission) and as a way to give back to the online DIY community.

Tuesday, May 7, 2019

Baja Reactor

This one was requested ages ago and I got halfway through laying it out, and then promptly forgot about it. It's a power amp/speaker cabinet simulator, emulating a SLO power amp and a couple different speaker cabinets based on the value used for CX (see schematic for values). This layout follows the Rev4 schematic from the thread here on FSB.

at
Labels: , , , ,

9 comments:

  1. PeteMay 15, 2019 at 11:59 AM

    Verified

    ReplyDelete
    Replies
    1. Effects LayoutsMay 15, 2019 at 12:46 PM

      Thanks Pete!

      Delete
    2. Ricco SeixasNovember 8, 2020 at 9:58 PM

      Perf or pcb?

      Delete
    3. Ricco SeixasNovember 10, 2020 at 5:01 AM

      Could you help with the layout of the baja reactor? I did the perf and pcb and both do not work, just a loud snoring, the only component changed was 8.2nf by 8.3nf. I can't read the schematic. thanks.

      Delete
  2. PANSYMay 31, 2019 at 6:36 AM

    can you add soome word for description about this electronic components?

    ReplyDelete
  3. Pedro PinheiroJune 10, 2020 at 7:39 PM

    Hello, can I plug the output directly to a Mixing Table?
    I would like to make a amp with cab sim so I can gig without having to drag my rectifier and cab around

    ReplyDelete
  4. Ricco SeixasNovember 9, 2020 at 8:12 PM

    I did the perf and pcb version, both not working, when connecting is a noise and nothing else. could someone review and find the error?

    ReplyDelete
  5. Berto25September 15, 2021 at 9:49 PM

    Hi guys... Ive build this pedal last night and when i put power and strum my guitar it start fading until no sound. I disconnect the power and put back same scenario... Thanks for your help...

    ReplyDelete

Subscribe to: Post Comments (Atom)