This is a library of perfboard and single-sided PCB effect layouts for guitar and bass. I'm not an electrical engineer by any stretch of the imagination, just a DIY'er who likes drawing layouts. It is meant for the hobbyist (so commercial use of any of these layout is not allowed without permission) and as a way to give back to the online DIY community.

Friday, August 25, 2017

Field Effects Acceleron Fuzz

Here's a pretty unique fuzz for Fuzz Friday–the Acceleron from Field Effects. It uses a mix of BJT and JFET transistors and offers a wide range of fuzz tones. I've laid it out for board mounted pots and you'll notice a big box film cap labeled ??? It's probably 2.2µF, but socket and experiment.


3 comments:

  1. Thank you!!!!
    Another spectacular fuzz for "our" collection.

    ReplyDelete
  2. Verified!
    At first I tested it with MPSA13 and 29, because it was not 14, but it did not sound good. Today the MPSA14 arrived and sound was soon another, loud and powerful. The first position of the switch is the one I liked the most, the center is very sharp and shrill and makes some noise, the third and more bassy and muffled, but it is usable.
    The big film cap used 2.2uF, the electrolitics of 1uF and 10uF, I used tantalum.
    Thanks for the great layouts, I can not spend more than a week, without doing at least one.

    ReplyDelete