This is a library of perfboard and single-sided PCB effect layouts for guitar and bass. I'm not an electrical engineer by any stretch of the imagination, just a DIY'er who likes drawing layouts. It is meant for the hobbyist (so commercial use of any of these layout is not allowed without permission) and as a way to give back to the online DIY community.

Saturday, February 28, 2015

EarthQuaker Devices Talons

The Talons is a great sounding overdrive pedal and is EQD's take on the Marshall Guv'nor. FSB member Zedsnotdead traced it and requested a layout with board-mounted 9mm pots to fit in a 1590B. As per usual, the pots should be mounted on the solder-side of the board. Watch out for the EQ pots as they are oriented 180º differently from the top row of pots. The in and out pads ended up in a bit of a weird spot, but shouldn't be an issue. (You'll just have to use a little more wire to get to the footswitch.)




at
Labels: , ,

8 comments:

  1. zedsnotdeadAugust 9, 2015 at 10:57 PM

    Great work man!!
    But watch the missing link connecting the other side of LED and 100pF.
    Cheers!!! :)

    ReplyDelete
  2. dtgehringAugust 10, 2015 at 9:52 AM

    Thanks for catching that, Zed. Fixed! Should be good to go now.

    ReplyDelete
  3. ernestoJanuary 21, 2016 at 3:20 PM

    hi, im going to do this pedal but can you make a drillint template for it,? please
    hope you can help me.
    Thanks.

    ReplyDelete
  4. rodrigoNovember 11, 2016 at 10:28 PM

    This is verified?

    ReplyDelete
  5. EdoApril 2, 2017 at 1:54 AM

    Wish you do the 16mm pots version

    ReplyDelete
  6. UnknownSeptember 6, 2017 at 9:57 AM

    Esta verificado?

    ReplyDelete

Subscribe to: Post Comments (Atom)