This is a library of perfboard and single-sided PCB effect layouts for guitar and bass. I'm not an electrical engineer by any stretch of the imagination, just a DIY'er who likes drawing layouts. It is meant for the hobbyist (so commercial use of any of these layout is not allowed without permission) and as a way to give back to the online DIY community.

Tuesday, December 9, 2014

Rockett WTF

Mmolteratx traced this one over on FSB. Figured I'd put it up. Seems to be a BossTone derivative with some tweaks. Here's the original:


And since all the offboard wiring is making a few people say, "WTF," here's the rat's nest that is the offboard wiring for this effect. The "In" and "Out" wires go to the normal 3PDT switch you'd use for effect on/off.



6 comments:

  1. You can tag this one too! Sounds freaking awesome! You just messed the names of the two switches

    ReplyDelete
  2. This is how it looks like:

    https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/13619_860687930641741_8223229457248763217_n.jpg?oh=83b44a52c84c421709482167e7988d20&oe=55855A41&__gda__=1434298940_5f77c822794cf0756db13dc825c8a0d9

    https://scontent-gru.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/p180x540/10257924_860687947308406_4516086929124483999_n.jpg?oh=fb9b654b2915013b4fbe48d9a4cd7882&oe=557737FB

    ReplyDelete
    Replies
    1. Nice work, Guilherme! Very tidy build. Thanks for posting the pics.

      Delete
  3. Hey buddy!
    I'm building this one, and let me tell you that the offboard wiring layout is a bit incorrect:
    - The board output must go to Boost Sw 2
    - The 4n7/18n cap switch could be in the extra output hole

    Thanks, as always! :)

    ReplyDelete
  4. It would appear that Q1 is listed as both a 2N2222 and 2N3906. Forced to assume that Q1 is 2N2222 and Q2 is 2N3906 respectively.

    ReplyDelete
  5. This comment has been removed by the author.

    ReplyDelete