Happy Fuzz Friday, all! Here's a fun noise maker that should go together pretty easily. Schematic  for reference.

What's everyone think of SMD? It seems more and more boutique builds are going that route, and with more parts only be available in SMD ...

Had several requests for the Tentacle, but it's just more or less a Dan Armstrong Green Ringer clone. But I had the idea of making a Gre...

Got a little simple boost/preamp for your Thursday. Should be a pretty easy fit in a 1590A. J113 alternatives would be J201, 2N5457, and pro...

Got a request for this one for Fuzz Friday. Designed by Masaru Kubota it's based on Roger Mayer's Axis Fuzz with a fair bit of tweak...

Here's a bit of a rare one for Fuzz Friday. It's essentially a silicon Fuzz Face with an output buffer and a mid scoop tone control....

Here's Jamie's take on the classic Rangemaster circuit, with a NPN germanium transistor. There's an added toggle to switch betwe...

Here's a simple MOSFET-based booster circuit that'd be a nice alternative to the SHO. Should fit in a 1590A. FYI, the 1N4739 diode i...

I traced this one a while back and created the Lawn Darts PCB over on the store from it. About time I made a perf and etch layout. If a Ran...

Stumbled across this schematic on FSB . It's a buffer/EQ/preamp for peizo pickups, specifically all Barcus-Berry electret microphone sys...

Found a bunch of Nine Volt Nirvana/Joe Gagan schematics on Fredd Brigg's blog . I'll probably do a few more of them, but first is th...

Looking for a mid-range frequency booster? This one's apparently really good at it. Schematic and discussion on FSB here .

Here's another alternative to the 3PDT for bypass wiring. It's based on the method VooDoo Lab uses for bypass and uses a optocoupler...

Continuing to knock out the last few ROG designs I haven't laid out. This one's a pretty easy little circuit, emulating the distorti...

Another Electra variation from Lovepedal. It's described as a two-stage COT50... I guess the "stages" are the different ways t...

Got a request for this one and thought it'd be a good Fuzz Friday layout. It's got a fair amount of treble and grit on tap and shoul...

Here's a nice little solid state amp for headphone use or a small 4Ω speaker. Good candidate for a bench top amp for testing purposes. Y...

Got a request to redo the LPB-1 with the pot board mounted. Can't say I'm opposed and it only took about 5 min to layout. :) Easy fi...

The Boost 'n' Buff is a simple little booster that doubles as a buffer when it's turned off (so it's not a true bypass effec...

Here's the Spaceman Saturn V boost pedal. It's a pretty unique booster and uses depletion mode LND150N3-G MOSFETs. In original units...