This is a library of perfboard and single-sided PCB effect layouts for guitar and bass. I'm not an electrical engineer by any stretch of the imagination, just a DIY'er who likes drawing layouts. It is meant for the hobbyist (so commercial use of any of these layout is not allowed without permission) and as a way to give back to the online DIY community.

Friday, June 27, 2025

AnalogMan Sunface

 Happy Fuzz Friday! Been meaning to redo this one for a while with board mounted pots. A buddy of mine was reminiscing about a Sunface he used to own and wish he still had, so I built this with some OC71s for his 40th b-day. AnalogMan has used loads of different transistors in these over the years, both germanium and silicon, so socket and experiment. Easy fit in a 1590B.




at
Labels: , ,

6 comments:

  1. andyJuly 14, 2025 at 2:11 PM


    very good!I love fuzz faces, next fuzzfriday I'll do the Deep Trip BOG! excellent face mods and buffered fuzz https://docs.pedalpcb.com/project/Marsh.pdf

    ReplyDelete
  2. Tim LingleyJuly 21, 2025 at 9:32 AM

    If I were to reverse the polarity on the caps and protection diode, would this work with PNP's? I have a couple of BART's to use up.

    ReplyDelete
    Replies
    1. Effects LayoutsJuly 21, 2025 at 10:18 AM

      Yeah that should be fine.

      Delete
    2. Tim LingleyJuly 27, 2025 at 7:35 AM

      Thanks! Verified that this does work. I built the little charge pump circuit in your utilities section to provide -9v and the pedal works great.

      Delete
  3. wawanAugust 1, 2025 at 6:07 AM

    Selamat pagi saya Herlan dari Indonesia, mohon upload PCB boss SP-1 Spectrum

    ReplyDelete
  4. wawanAugust 1, 2025 at 6:08 AM

    Good morning, My name is herlan from Indonesia....i need layout and PCB Boss SP-1 Spectrum....please....and thank you

    ReplyDelete

Subscribe to: Post Comments (Atom)