This is a library of perfboard and single-sided PCB effect layouts for guitar and bass. I'm not an electrical engineer by any stretch of the imagination, just a DIY'er who likes drawing layouts. It is meant for the hobbyist (so commercial use of any of these layout is not allowed without permission) and as a way to give back to the online DIY community.

Friday, December 21, 2018

Cornish P2 (probably)

For Fuzz Friday here's what most people think is the Cornish P2. It's a slightly modified Ram's Head Big Muff with flat mids and the Cornish buffer up front. If you want to use the Cornish bypass like the original check out the Cornish G2 layout for the bypass board.





Also, this will be the last layout of the year. Taking some time to rest up over the holidays. See you in the New Year and Happy Holidays everyone!

27 comments:

  1. All the best for Christmas and the new year.

    ReplyDelete
  2. FROHE WEIHNACHTEN!
    from the home of "silent night" Austria!!!
    thank you very much from the bottom of my heart for your great work!
    greetings to everybody of this great DIY community and a
    HAPPY NEW YEAR!!!

    ReplyDelete
  3. Nadolig llawen a Blwyddyn Newydd dda!

    ReplyDelete
  4. Feliz navidad amiguero!
    https://youtu.be/9YvwJkp_Pjs

    ReplyDelete
  5. Feliz Natal e próspero ano novo.
    Let’s see what 2019 reserves.

    ReplyDelete
  6. Buon Natale! ;)
    and thanks a lot for your work!

    ReplyDelete
  7. I would like to request another amp sim kindly ... the legacy. https://tagboardeffects.blogspot.com/2014/06/leegazzy-carvin-legacy-emulator.html?m=1

    If you need ün a schematic I can post here sir. Aand take care :)

    ReplyDelete
  8. HI EVRYBODY

    GOOD YEAR FOR ALL COMMUNITY

    ReplyDelete
  9. Feliz navidad y prospero año nuevo! (Venezuela)

    ReplyDelete
  10. This comment has been removed by the author.

    ReplyDelete
    Replies
    1. used to have a link to it but i think it got taken down sorry not anymore
      I'll probably find a schematic eventually though it will just take a while but its not important it would probably cost more to build one than buy one even though its pretty expensive

      Delete
    2. I also noticed its made of smd components and multiple different Ics which are unlabeled even on the schematics i had links to

      Delete
  11. This comment has been removed by the author.

    ReplyDelete
  12. Does anybody verified it? Thanks

    ReplyDelete
    Replies
    1. Not that I'm aware of. Every layout has a verified or unverified tag on it. It doesn't show up on mobile, but if you go to the bottom of the mobile page and tap "View web version" you can check.

      Delete
  13. Hi all!
    Please tell me, what type of capasitors 0.1uF? (electrolitics or others)
    Thanks

    ReplyDelete
    Replies
    1. Those are electrolytic but film or ceramic could also be used.

      Delete
  14. Hey, you can tag this as verified, sounds very good (as a muff should)

    ReplyDelete
  15. Does it need a buffer to be the same as the cornish? Thanks

    ReplyDelete
    Replies
    1. looking at the schematic on the Madbean forum: https://www.madbeanpedals.com/forum/index.php?topic=8385.0 theres a cornish buffer for the bypass as well as the input buffer thats already on the layout

      Delete
  16. HELLO BOYS SOMEONE OF YOU WOULD HAVE THE SCHEME OF THIS CORNISH P2?

    ReplyDelete
  17. Build it, including buffer. changed the tone circuit to a standard muff for better control

    ReplyDelete