This is a library of perfboard and single-sided PCB effect layouts for guitar and bass. I'm not an electrical engineer by any stretch of the imagination, just a DIY'er who likes drawing layouts. It is meant for the hobbyist (so commercial use of any of these layout is not allowed without permission) and as a way to give back to the online DIY community.
Friday, May 26, 2017
Black Arts Toneworks Revelation
For Fuzz Friday here's the Revelation from Black Arts Toneworks. There are 2 versions of the Revelation: the Super Bass and Super Lead. The Super Bass is a stripped down Pharoah without the tone control, no clipping diodes in the 2nd gain stage, and an input gain control. The Super Lead version is the same circuit, but with the values of the Black Arts LSTR.
Subscribe to:
Post Comments (Atom)
Hi, noob here, what are the components called labelled E B C?
ReplyDeleteTransistors
DeleteHi, What is the third transistor value in the super bass version?
ReplyDelete2N5089
Deleteemitter, base. collector, E B C the pins on the Transistor MaplePaladin can also be E C B the transistor pinout guide above will help.Sometimes you have to twist the pins around if you dont have the right transistors.hope that helps
ReplyDeleteGot it now, thanks!
DeleteHi, I've made the the two layouts. Circuits are working and it's verified. I've just substituted the transistor for what i have in hand.
ReplyDeleteSuper Bass: Q1=BC550C Q2&Q3 = BC549. Twisted 180 degree to suit the pin configuration on the layout.
Super Lead: Q1~Q3 BC517. Also twisted 180 degree.
Although it sounds good, i will change the trannies with the correct parts when available.
Thanks for verifying!
Deleteis there anything to do to i make it louder?
ReplyDelete