This is a library of perfboard and single-sided PCB effect layouts for guitar and bass. I'm not an electrical engineer by any stretch of the imagination, just a DIY'er who likes drawing layouts. It is meant for the hobbyist (so commercial use of any of these layout is not allowed without permission) and as a way to give back to the online DIY community.

Wednesday, December 9, 2015

Lovepedal Superlead

The Superlead is Lovepedal's take on the Marshall Guv'nor. It has a simplified tone stack compared to the Guv'nor, but has a switch to select between silicon diodes and LED for clipping. Great for 80's metal tones.



On an unrelated note, I made a Facebook page for the blog. I figure you guys can post build pics there more easily if you want and I'll post the layouts over there as well. So head over and give it a like if that's your thing.
at
Labels: , , ,

19 comments:

  1. fredDecember 30, 2015 at 12:52 AM

    spdt ON-ON or ON-OFF-ON

    ReplyDelete
  2. BoyetJuly 22, 2016 at 5:46 AM

    Please label it as verified.

    ReplyDelete
  3. UnknownOctober 8, 2016 at 6:21 PM

    is it work?

    ReplyDelete
  4. sinaiSeptember 19, 2017 at 1:36 AM

    Hi please tell me it sounds as same as you-tube demo?

    ReplyDelete
    Replies
    1. Miko1512February 8, 2019 at 4:43 PM

      its pretty much the same just on perf-board

      Delete
    2. Paulo ShureJuly 29, 2019 at 7:53 PM

      https://www.youtube.com/watch?v=ZiEG49Tyh7A

      Delete
  5. Manaf SlimanJune 4, 2019 at 6:55 PM

    sir is that 4558 dual op-amp ?? thanx

    ReplyDelete
    Replies
    1. Effects LayoutsJune 4, 2019 at 8:39 PM

      Yes

      Delete
    2. Manaf SlimanJune 5, 2019 at 4:41 PM

      is that layout has been Verified? sorry for the question, but the component in my country are really expensive, and thank you man for all the great work that you did in this website, you rock

      Delete
    3. Manaf SlimanJune 5, 2019 at 4:45 PM

      and can i use 5mm led instead of 3mm ??

      Delete
    4. Effects LayoutsJune 5, 2019 at 5:01 PM

      It is verified and 5mm LEDs should be fine.

      Delete
  6. ThafaJune 11, 2019 at 4:46 AM

    Good job

    ReplyDelete
  7. Paulo ShureJuly 29, 2019 at 7:54 PM

    https://www.youtube.com/watch?v=ZiEG49Tyh7A works....

    ReplyDelete
  8. Wahyu ekoFebruary 24, 2020 at 4:56 AM

    If I want to use Potensio B100K what components should be replaced

    ReplyDelete
  9. Ricco SeixasFebruary 21, 2021 at 1:24 PM

    builds and works, however, IMHO connected at 18v gets much better compression and sonority !!! greetings from Brazil.

    ReplyDelete
  10. João LimaJanuary 7, 2022 at 10:58 AM

    Montei este projeto, hoje. A maioria dos componentes retirei de sucatas de TVs e computadores que encontrei no lixo. Em breve, farei um com componentes novos! Saudações do Brasil.

    ReplyDelete

Subscribe to: Post Comments (Atom)