Pages

Tuesday, May 16, 2023

Sarno Earth Drive

 This one's gotten a fair amount of hype over the years. It's essentially a Timmy without the bass control and a few different values. The IC and clipping diodes haven't been confirmed, other than 2 silicon, 2 germanium. 1N4148 and 1N34A should get you pretty darn close. IC is just a dual op-amp so socket and audition your favorites. Schematic here for reference.



3 comments:

  1. verified Layout! 4558 and 4148,1n270s. Its like so many drives but is a good one. I'll test different op amps and diodes for kicks later.

    ReplyDelete
  2. Make us The Lenny, John Mayer's boost.
    Below is a documentation with the scheme.
    https://www.youtube.com/watch?v=F7rE77aiNeo


    https://docs.pedalpcb.com/project/Lenora.pdf

    ReplyDelete
  3. https://drive.google.com/drive/folders/1SskbbfxpIaHnh9bHgJ0FHzhXmEnzaat5?usp=sharing

    just want to share a softlatch circuit with only 2 npn transistor. think this is not quite small. can you make it more compact like what you did on 3 transistor softlatch circuit

    ReplyDelete