Yes, Modulation Monday is back with the Ross Phaser. It's not for the feint of heart, but doesn't require any JFETs, matched or otherwise. Instead it uses OTAs with 3, LM13700N (one for the LFO, two for the audio path). Should fit nicely in a 125B with top mounted jacks. Schematic for reference.
It works! you can mark it verified. It does have a vibe and feel like a vintage pedal, and some great phasing sounds.
ReplyDeleteHow about Beetronics whoctahell? a nice simple one. https://docs.pedalpcb.com/project/DirtDauber-PedalPCB.pdf
DeleteThe 3.3 electro is 3.3uf
DeleteWas checking the comments exactly for this.Thanks
Deletehttps://docdro.id/4YhimFr
Deletecheck my post too!!
https://www.diystompboxes.com/smfforum/index.php?topic=130479.0
have fun!!
Hola a todos .. Funciona ! los integrados a 2024 todavia se consigen.. yo los compre desde china, Saludos.
ReplyDeleteI finally got around to putting this one together. Thank you!!! This layout is excellent work as always, my board is now swooshing and swirling like never before. I did follow Dee's advice from an earlier comment and used a 3.3uF cap for C11 as indicated in the schematic.
ReplyDelete