Had a couple questions about stompbox use with line level, so I drew up this. This allows you to drop the line level signal down to instrument level, send it out to whichever stompboxes you want to use, then back and amplified back up to line level. Schematic and discussion here. Made two versions, one that could be run off typical +9v pedal power, and another for bi-polar 12v supply used in Eurorack synths, so you can build it either in pedal form or Eurorack module form.
this looks great but im wondering if this would correctly match impendence going from line level to instrument level?
ReplyDeleteProbably not :\
DeleteCan it be use as a amplifier loop?
ReplyDeleteIn theory yes
DeleteThanks for another layout!
ReplyDeleteAny chance of you making one of the PAL800?
https://www.musikding.de/M800-Overdrive-kit
Yes,please David!!!
DeletePlease M800 pedal pcb!!!
ReplyDeletehttps://www.pedalpcb.com/product/m800/
Thank you Bro!!!
Is it possible to only make use of one of the circuits? So if i have a line level signal and want to convert it to instrument level? Or having an instrument level signal that i wanna convert into line level?
ReplyDeleteI built a doubled up +-12v version of this as a synth module. Big ole thumbs up thanks and verification.
ReplyDeleteis this can use as reamp box to send signal from audio interface to stombox and to amp?
ReplyDelete