Pages

▼

Thursday, October 1, 2020

Grind Customs FX Tenebrion

 The Tenebrion was designed by CultureJam and is the further development of the Box of Hall reverb. It uses the Belton BTDR-2 reverb brick, which I've designed to fit on the solder-side of the circuit board. You should be able to squeeze it into a 1590B.







at

9 comments:

  1. theeggmanOctober 2, 2020 at 5:12 AM

    Nice build !!

    Do you have a link for the schematic ?

    ReplyDelete
  2. Arnold DikstaalOctober 3, 2020 at 2:34 PM

    Which BTDR-2 is used? Long/medium/short?
    Could you upload a bigger picture? When I click on it it seems even smaller :)

    ReplyDelete
    Replies
    1. Effects LayoutsOctober 3, 2020 at 3:27 PM

      Which ever length you prefer. Sorry about the image. Google has changed the backend of blogger and I'm not used to it yet.

      Delete
  3. naivecyMarch 31, 2021 at 1:59 AM

    can i modify power filter section just like the other circuits with 1n4001(going between +9v and gnd)?
    i don’t have any 1n5817s ;)

    ReplyDelete
    Replies
    1. Effects LayoutsMarch 31, 2021 at 9:43 PM

      You can or you can use the 4001 as a sub for the 5817. You'll just have little bit more voltage drop that you would with the 5817, but it will still work fine.

      Delete
  4. dsfAugust 30, 2021 at 8:04 PM

    Verified, but the tone is subtle. any sugestion for more range?

    ReplyDelete
  5. dsfJune 28, 2023 at 8:49 AM

    Is just upper the 47n cap, 100n or 150n is ok. the tone cut more treble.

    ReplyDelete