Pages

▼

Friday, March 2, 2018

Jext Telez White Pedal

Here's a pretty cool one for Fuzz Friday–the Jext Telez White Pedal. It's a recreation of an onboard overdrive unit in a vintage Vox amp used by George Harrison in the late 60s. Schematic can be found here. Pots are board mounted and I've tweaked the Yoko switch to just be a toggle instead of a rotary like the originals, and it should fit nicely in a 125B.


at

15 comments:

  1. johnkMarch 5, 2018 at 10:12 PM

    verified, with the exception of the gain pot working backwards.

    ReplyDelete
    Replies
    1. AnonymousMarch 5, 2018 at 11:16 PM

      Thanks John! I did the Tagboardeffects vero layout on this one, but ran into some oscillation issues in the upper end of the gain knob that I've not sorted out. I was hoping to see this layout work so that I could have another go at it. It's an awesome sounding pedal!

      Delete
    2. OcularDawnMay 8, 2018 at 12:48 AM

      Hi Wad, I'm looking to build this. A few people have encountered the oscillation problem. How did you manage to sort it? Thanks.

      Delete
    3. AnonymousSeptember 2, 2019 at 7:15 PM

      (just noticed your comment... sorry)
      Never did fix it using the vero layout. I'm using David's layout here without oscillation. No issues!

      Delete
  2. Effects LayoutsMarch 6, 2018 at 1:34 PM

    Thanks for catching that, John. Fixed now.

    ReplyDelete
    Replies
    1. AnonymousMarch 7, 2018 at 1:05 PM

      Awesome! Much appreciated, David.

      Delete
  3. AnonymousMay 6, 2018 at 11:49 AM

    After build gain pot did not work. Problem was in lane that connected resistor 18К to ground. I downloaded schematic on first day after publication :) Now picture is right.

    Effect works perfectly, very cool pedal. I used Dunlop inductor with a green dot. Thanks for this and sorry for my english!

    ReplyDelete
  4. UnknownJune 8, 2018 at 11:49 AM

    Thanks for sharing! Does orientation of the inductor matter? I picked up the same Dunlop one a few others here got as well. But never used an inductor before so not sure if it's orientation sensitive.

    ReplyDelete
  5. UnknownFebruary 13, 2019 at 1:42 AM

    Vorrei costruire il pedale, non ho capito i collegamenti dell'interruttore rotativo, dove posso trovare uno schema dei collegamenti esterni?
    Si può usare un induttore fasel al posto del Dunlop.
    Grazie
    Nicolino Pagano

    ReplyDelete
    Replies
    1. AnonymousSeptember 2, 2019 at 7:14 PM

      Questo non utilizza un interruttore rotativo. Usare un DPDT on-on-on interruttore a levetta.

      Delete
  6. ZZOYDSeptember 26, 2019 at 2:51 PM

    Great pedal! Used rotary switch for 4 points, added 15n cap!

    ReplyDelete
  7. UnknownJune 14, 2020 at 11:45 PM

    This is verified.. I used a notch filter gyrator instead of the wha inductor,..sounds great!

    ReplyDelete
    Replies
    1. UnknownAugust 19, 2020 at 9:30 AM

      hi, just wondering how you implemented a gyrator instead of an inductor. would love to know more.

      Delete
    2. UnknownNovember 17, 2024 at 4:02 AM

      Not him but found this article to be useful: https://sound-au.com/articles/gyrator-filters.htm

      Delete
  8. ArthurJanuary 8, 2021 at 5:51 PM

    Hi, I've done this one a few weeks ago, it works fine ! But the gain pot is working backwards, and didnt give a lot of difference between light gain or fuzz... Is there any solution for this issue ? Thanks

    ReplyDelete