Pages

▼

Friday, June 9, 2017

4ms Noise Swash

Figured with all the big layouts this week, I'd better finish it off with another big one for Fuzz Friday. This one's great if you like flipping switches, playing with knobs and making a ton of noise. Not all that complicated really, just a lot of controls for tweak-ability. The original 4ms design says to use a switched pot for the Self Oscillation control, but you can use a regular pot and a separate SPST switch instead if you want. Here's the schematic for reference.


at

10 comments:

  1. UnknownJune 17, 2017 at 1:22 AM

    I've always wanted to build this but I didnt want to lay it out myself nor use the tagboard layout, so i appreciate you doing this. Been checking this with the schematic and i see some problems with how you have the tl072, like pin 6 is connected to everything that pin 2 should be connected to, pin 1 and 7 have the same problem, a 1k resistor is missing on the wiper of volume pot. Might be more conflicts but yea

    ReplyDelete
    Replies
    1. Effects LayoutsJune 19, 2017 at 3:14 PM

      The reason those pins are swapped around is because a TL072 is a dual opamp, so there are 2 identical opamps in one package. They do the same thing, so they're interchangeable. There's no difference in sound or performance. And the 1k resistor I just forgot. haha I've updated the layout with it though. Thanks for catching it.

      Delete
    2. UnknownJune 21, 2017 at 12:07 AM

      oh shit cool thanks

      Delete
  2. UnknownJune 25, 2017 at 10:45 AM

    If you're down for it, another fun noise pedal to lay out would be the nocto loco, its another from 4ms. thing sounds nuts

    ReplyDelete
  3. rraymmarquezJuly 16, 2017 at 9:12 PM

    call this a verified; i just need to theck the power and tone knob, doesnt seem to be making something, and the preclipping switch drops down the volume, a lot!

    ReplyDelete
  4. ДмитрийFebruary 16, 2018 at 5:53 AM

    yeah, call this a verified!!! power and the tone knob both work great. just one thing: there should be a 100n cap instead of 10n on leg 1 of tone pot due to schematics.

    Man, maybe you can layout Madbean Zero Point SDX2? I thinks many want to have it in their collection!

    ReplyDelete
  5. PeteApril 9, 2018 at 11:00 AM

    Just built this one - verified.

    ReplyDelete
  6. JulesApril 18, 2020 at 10:08 AM

    This will be my first attempt at making an effect pedal, and i have a cumple of questions about the materials...
    What are the 1uF squares? I know its a cap, but, what kind? I would really appreciate your help, thanks!!!

    ReplyDelete
  7. JulesApril 20, 2020 at 6:09 PM

    Thanks a lot!!

    ReplyDelete