Pages

▼

Friday, April 21, 2017

Black Arts Toneworks Fnord

Got a little Eagle excursion for Fuzz Friday. Here's the Fnord from Black Arts Toneworks. It's pretty much the same as the Escobedo Digital Octaver Fuzz with an added diode lift switch (though that's jumpered in the originals). It's a pretty gnarly fuzz with a wide range of tones. For you perfboard builders you should be able to translate this onto perf pretty easily.




Here's the schematic for reference:

at

6 comments:

  1. IvMApril 21, 2017 at 10:23 AM

    Great! Thanks, as always.
    Which program do you use to make the schemes?

    ReplyDelete
  2. EdoApril 23, 2017 at 1:50 AM

    Would u mind to share the eagle files? 🙏

    ReplyDelete
    Replies
    1. Effects LayoutsApril 26, 2017 at 11:46 AM

      I don't share design files, but if you want to order a board from OshPark you can do so here:

      https://oshpark.com/shared_projects/rwroXe7t

      Delete
  3. IvMMay 22, 2017 at 8:30 PM

    Verified!
    Nice gated/velcro fuzz

    ReplyDelete
  4. UnknownNovember 2, 2019 at 3:30 AM

    Verified!!! Just a few notes:
    -the cd4070 IC is very sensitive, so be careful and don't touch the pins with the hand, if you touch it, sometimes the response is very different and the notes will be excesive gated.
    -Put a trimpot instead the 100K(R7) and try different values for C5,this will help to achieve a better octave effect.
    -1N4148 for clipping diodes works perfect, 3mm red leds works nice too.

    ReplyDelete