Pages

▼

Monday, March 20, 2017

Barber Direct Drive

You asked for it, so here it is: the Barber Direct Drive. This layout follows the new compact version with 2 toggles–one for harmonics, the other for gain. The circuit itself is very similar to the original Tone Pump circuit with a few modifications. Should fit nicely in a 1590B.



at

9 comments:

  1. UnknownMarch 20, 2017 at 12:28 PM

    Oh yeah! Thanks for making this layout. Hope to give it a go this week. Which schematic did you use?

    ReplyDelete
  2. alexmanMarch 20, 2017 at 1:38 PM

    Thanks for the layout! Can Barber Electronics Small Free for the collection )
    http://www.freestompboxes.org/download/file.php?id=16860&mode=view

    ReplyDelete
  3. UnknownMarch 20, 2017 at 4:00 PM

    This one on perf would be awesome! http://www.parasitstudio.se/uploads/2/4/4/9/2449159/thereminfuzzvero.png

    ReplyDelete
  4. wainer.said@gmail.comMarch 20, 2017 at 4:03 PM

    Used switch and the SPDT on off on ?
    Center off? thanks

    ReplyDelete
    Replies
    1. Effects LayoutsMarch 20, 2017 at 4:13 PM

      The SPDT is an on/on in the original. You could try the on/off/on though.

      Delete
  5. wainer.said@gmail.comMarch 26, 2017 at 6:43 PM

    Verified, works very well, the only detail and the capacitor that is marked as 47NF it and 47UF correct: Great layout congratulations can mark as verified

    ReplyDelete
  6. E5April 6, 2021 at 10:58 PM

    It's awesome, build it and works excellent. Actually we have OD and Distortion (80's Hair Rock) in one pedal. It's verified and recommended to build.

    ReplyDelete
  7. LucasNovember 5, 2021 at 12:20 PM

    I've built it but i am getting almost no gain at all. All traces seem to be ok. Can you give me some advice to troubleshoot this? Thank you very much!

    ReplyDelete