Here's an older design from Catalinbread (now discontinued). The Hyperpak is based around a CD4007UBE to generate a wide array of tones. Be sure to use the unbuffered version of 4007. Shouldn't be too hard to fit into a 1590a like the originals.
in memory of a true Diyer GodSaveMetal R.I.P.(Roberto Barrios Thays) here's a mod - tone control http://files2.soniccdn.com/old/1383134e026fe249780.gif
The values of the components are all in the layout, so I don't have a list, but you should be able to make one pretty easily. The circuit's not that big. Since the supply voltage of this circuit is 9v, anything rated above that should be ok. Most film or ceramic caps I use are rated at 100v I think. And for the electrolytic caps I use 35v or 50v. The 4001 part is a diode (1N4001). Here it's for polarity protection.
Yeah, I thought it! But i couldn´t find de "out" at the circuit! And good, I read the General Layout Notes. I connect my 3PDTs exactely like you! I never confused anymore. And I got a great tip there, about the wireless ground in the metalic enclosures! I thought about it but never tryied. I´m a noob in the eletronics tissues yet. I´m learning about it! Look, i never wrote here, but i´m using a lot your blog. It´s really amazing! Me and my friends from Brazil are using this handmade pedals now! It´s so great! :D
Gosh, i tried to fix it... I connected the Vol. 2 to the 3PDT "Out" and nothing happens! :( I couldn´t find the "out" of the circuit. All of the other projects worked pretty nice!
you can tag this one! awesome, simple overdrive with a lot of punch but i find it didn't produce enough of high end (verry misleading video) so i've lowered the cap at the output to 2.2ยต and that gave me what i needed. just that tad more highs :p if i put it in front of my fenrir, the fenrir roars like hell so i'm keeping this one on the board ;) thnx for the project!
in memory of a true Diyer GodSaveMetal R.I.P.(Roberto Barrios Thays)
ReplyDeletehere's a mod - tone control
http://files2.soniccdn.com/old/1383134e026fe249780.gif
el gran roberto un genio entre los diyers!!!
Deleteun capo! Saludos desde argentina:)
DeleteThis comment has been removed by the author.
DeleteThe values of the components are all in the layout, so I don't have a list, but you should be able to make one pretty easily. The circuit's not that big. Since the supply voltage of this circuit is 9v, anything rated above that should be ok. Most film or ceramic caps I use are rated at 100v I think. And for the electrolytic caps I use 35v or 50v. The 4001 part is a diode (1N4001). Here it's for polarity protection.
DeleteThanks!
Delete(Btw. I accidentally erased the previous comment).
Link is dead to tone mod, you still have it?
Deleteplease make a layout Boss Blues Driver BD2. This pedal deserves special attention, and I think many will be interesting. Many thanks
ReplyDeleteI think so too
Delete
DeleteI support the proposal you have a very neat projects
a layout of this one http://s279.photobucket.com/user/flo0987654321/media/Vs_jh_2.jpg.html
ReplyDeletePlease bro... Vol. 2 to out... this "out" is from the output jack?
ReplyDeleteIt's the circuit out. Typically it goes to the footswitch. See the General Layout Notes for offboard wiring info.
DeleteYeah, I thought it! But i couldn´t find de "out" at the circuit! And good, I read the General Layout Notes. I connect my 3PDTs exactely like you! I never confused anymore. And I got a great tip there, about the wireless ground in the metalic enclosures! I thought about it but never tryied. I´m a noob in the eletronics tissues yet. I´m learning about it! Look, i never wrote here, but i´m using a lot your blog. It´s really amazing! Me and my friends from Brazil are using this handmade pedals now! It´s so great! :D
ReplyDeleteGosh, i tried to fix it... I connected the Vol. 2 to the 3PDT "Out" and nothing happens! :(
ReplyDeleteI couldn´t find the "out" of the circuit. All of the other projects worked pretty nice!
you can tag this one!
ReplyDeleteawesome, simple overdrive with a lot of punch but i find it didn't produce enough of high end (verry misleading video) so i've lowered the cap at the output to 2.2ยต and that gave me what i needed. just that tad more highs :p
if i put it in front of my fenrir, the fenrir roars like hell so i'm keeping this one on the board ;)
thnx for the project!
Anyone has the tone mod?
ReplyDelete