BearFoot FX Baby Pink Booster

Here's a cool little booster from Bjorn. Fairly typical JFET boost but the way the originals are wired, when the effect is bypassed, it's buffer. This layout reflects that original wiring, so wire the In pad to the input jack, Out pad to the output jack, and use a DPDT footswitch. If want to wire it for true bypass, jumper the 2 switch pads at the top of the board and omit the 150k resistor going from lug 1 of the Boost pot to ground. Or you can wire up a SPST switch to go between buffer and boost. Lots of options with this little circuit. Works well off 18v too.