Pages

▼

Friday, September 16, 2016

Way Huge Swollen Pickle Mk I

For Fuzz Friday we have the original Swollen Pickle from Way Huge Electronics. One of the unique things about this Muff clone is the use of a quad transistor array instead of 4 individual transistors. This makes for a quieter pedal and more consistency in transistor matching. However if you don't feel like tracking down an MPQ3904 or NTE2321, you can use 4 individual transistors. Just note the pinout in the layout below.


at

6 comments:

  1. wainer.said@gmail.comSeptember 16, 2016 at 9:45 PM

    in case I use transistors , which I use for mounting

    ReplyDelete
    Replies
    1. BoyetSeptember 17, 2016 at 2:16 PM

      I'm in the middle of doing this pedal and I use transistor sockets like this http://d13z1xw8270sfc.cloudfront.net/resize/90736/1430738229872_sil-3.jpg/400/400/0/

      Delete
  2. BoyetSeptember 18, 2016 at 11:19 AM

    It's verified. I use bc549 transistors. Very quite and sound good to my ears.

    ReplyDelete
  3. joakoMarch 9, 2017 at 10:02 AM

    I cant find 470k resistances, in my country there are 475k comercial resistances. is there any problem if i use this value?

    ReplyDelete
  4. NickyMarch 13, 2019 at 2:03 PM

    An error was made in the PCB, 1.5 ohm should be replaced by 1.5 kΩ. This is the emitter resistor of the output stage.

    ReplyDelete