Pages

▼

Wednesday, December 2, 2015

Split 'n Blend

Got a request for more blend effects, so let's start with a simple one. You can use this as a daughter board to add a blend control to an existing pedal (or incorporate it into something else you're building), or use it as a stand alone blending pedal. 2N5457 should work just fine for both transistors.


at

47 comments:

  1. iblis hecateDecember 2, 2015 at 10:44 AM

    transistor that I can use?

    ReplyDelete
  2. Hannibal LecterDecember 3, 2015 at 10:57 AM

    Built using 2n5457. Works very well. Very transparent. Thanks.

    ReplyDelete
  3. UnknownDecember 3, 2015 at 3:00 PM

    please show me some ways to use it!!!
    too newie ...

    ReplyDelete
    Replies
    1. Effects LayoutsDecember 3, 2015 at 3:40 PM

      I've used something like this on a Big Muff before. It allows you to mix in clean tone so that the fuzz isn't too over the top. The Send pad on this layout would go to the In pad and Return pad would go to the Out pad on whatever you're trying to add a clean blend to. You could also use in it's on enclosure and just have 4 jack. Then you could have a loop of effects that you could blend into the rest of your signal chain on your pedal board. Lots of different things you can do with this kind of circuit. Hope that helps!

      Delete
    2. UnknownDecember 4, 2015 at 4:53 PM

      so this little thing work for everything
      damn, shut up and take my money!!

      http://o.aolcdn.com/dims-shared/dims3/GLOB/crop/628x393+0+0/resize/250x156!/format/jpg/quality/85/http://o.aolcdn.com/hss/storage/midas/5be5699e0f86e4b6b48fd664f7a1bd87/201063060/Shut-up-and-take-my-money-628.jpg

      thanks!! from argentina ;)

      Delete
  4. UnknownDecember 9, 2015 at 11:51 PM

    Send to In (board)
    Return to Out (Board)

    In and Out here is the pad on the board right ?

    so if we add this, there will be two cables from previous board and this new board in one hole pad ?

    please confirm Sir.. thank you

    ReplyDelete
  5. ehss192July 21, 2016 at 9:08 AM

    Anyone else still able to hear their wet signal when the pot is turned all the way down? I very quiet, but still audible.

    ReplyDelete
  6. UnknownNovember 5, 2016 at 4:45 PM

    Can I just use this as a splitter? e.g. to add an output for a tuner?

    ReplyDelete
    Replies
    1. Effects LayoutsNovember 9, 2016 at 3:36 PM

      Yep. It should work fine in that application. The out would be the blend 1 pad. Just ignore the pot wiring.

      Delete
  7. UnknownNovember 5, 2016 at 5:09 PM

    Also could you do a layout for the Boss Blues Driver? I'd like to build one of the modified versions and a transfer layout would be awesome!
    Great bog and fantastic layouts!

    ReplyDelete
  8. AnonymousMay 29, 2017 at 2:18 PM

    What about a wah with blend control? It should ve interesting ir a waste of time?

    ReplyDelete
  9. fredJune 17, 2017 at 6:44 PM

    hi, Can I use this blend with a compressor?

    ReplyDelete
  10. UnknownJune 24, 2017 at 5:32 PM

    When using it with a overdrive pedal (ROG tube reamer), is it possible to match the output level of the clean signal, right now it works like an attenuation/volume knob.

    ReplyDelete
    Replies
    1. Effects LayoutsJune 26, 2017 at 9:22 AM

      The output of the overdrive is going to be higher than your clean signal, so when you start blending in clean signal, there's going to be some volume drop. Easiest way to even things out is lower the volume of the overdrive.

      Delete
  11. AcikaJuly 2, 2017 at 4:04 AM

    I can't find PCB image for this layout in misc folder. Can you help me?

    ReplyDelete
  12. elo_musicSeptember 25, 2017 at 12:31 PM

    What other transistor can I use?

    ReplyDelete
    Replies
    1. Effects LayoutsSeptember 25, 2017 at 12:41 PM

      J201 probably

      Delete
    2. elo_musicOctober 11, 2017 at 7:54 AM

      but the J201 seems to me, needs to be skewed to work well, that another possible transistor would work ??

      Delete
    3. Effects LayoutsOctober 11, 2017 at 9:18 AM

      Google is your friend...

      http://bit.ly/2ycdH5H

      Delete
  13. Oatmeal, the BanditMarch 1, 2018 at 6:13 PM

    Just built as a standalone pedal for bass guitar. I'm noticing a drop-off of the bass frequencies when I use it. Is this something to be expected? Would changing cap values help?

    Other than that it's quite the useful pedal. Thanks for the design!

    ReplyDelete
  14. gennaroMarch 7, 2019 at 7:21 AM

    hi guys this blend could be installed u on a clone chorus ce-2, clone demeter compulator, clone electric mistress?

    ReplyDelete
  15. Brutha D (ave).November 15, 2019 at 5:05 PM

    Hi. Will MPF102 work in place of the 2N5457?
    Cheers.

    ReplyDelete
  16. fuss buzzFebruary 23, 2020 at 8:41 AM

    Would it works on boss cs3 compressors?
    Because i heard the compressor hated the blend circuits sometime. Thanks.

    ReplyDelete
  17. PaulSeptember 13, 2020 at 8:37 AM

    Could this be used to split the dry signal to two sends? In order to mix two effects for example?

    ReplyDelete
    Replies
    1. AlioSeptember 20, 2020 at 7:41 PM

      If you need two sends and returns, check out the ROG splitter blend. It even has a phase shifter switch for one channel but three times as big.

      Delete
  18. PasquinoOctober 31, 2020 at 4:44 PM

    This comment has been removed by the author.

    ReplyDelete
  19. PasquinoOctober 31, 2020 at 4:54 PM

    I built this pedal today, split mode, with two output, and I want to cross-fade the amount of the outputs, when the first output signal go up, the second go down and viceversa. To do this, I tried to use a dual B100K connected like this:

    - ground -----> log 1 (L)
    - pcb out 1 --> lug 2 (L)
    - out 1 ------> lug 3 (L)

    - out 2 ------> lug 1 (R)
    - pcb out 2 --> lug 2 (R)
    - ground -----> log 3 (R)

    when the pot is on 12 I have a fuller signal, when is full clockwise or full counter-clockwise I notice a loss. Maybe I need to add a recovery stage or a different taper?

    ReplyDelete
  20. UnknownDecember 14, 2020 at 9:21 PM

    I have an horrible pop sound... Amy idea
    I put 1m input n output pulldown resistir

    ReplyDelete
  21. UnknownDecember 14, 2020 at 9:22 PM

    Ive an horrible pop sound, any idea how to eliminate?
    I used 3pdt
    Millenium 2
    Pulldown resistors and nothing helps

    ReplyDelete
  22. AnonymousFebruary 13, 2021 at 4:39 PM

    I get terrible oscillation with my build of this using 2n5457 jfets. Anyone run into this? I thought it was just because I had them in the wrong orientation, but after fixing that I have the same issue.

    ReplyDelete
  23. Dennis KriggerMarch 7, 2021 at 2:18 AM

    I want to use ir without the blend pot.
    I'm want do make a big muff and a lpb1 in parallel and use their volumes to control the mix.
    How can i eliminate the blend knob?

    ReplyDelete
  24. RomainApril 27, 2021 at 9:16 AM

    Hi, would this pedal work with line level signals?

    ReplyDelete
  25. pearl bluesMay 26, 2021 at 4:49 PM

    Hi, I built this onto my Dyna Comp clone. With the blend pot fully counter-clockwise it's just the clean signal, and with the pot fully clockwise it's just the compressor. As I move the pot to the centre position the signal level drops. Is this anything to do with phase cancellation? How do I correct this? Many thanks for any help 👍

    ReplyDelete
    Replies
    1. Tim MikhailouskiJune 8, 2021 at 5:25 AM

      Hi!
      In such case you'd better build this circuit with opamp buffers instead of JFETs, and 'return' buffer should be inverted. You can build it using one TL072

      Delete
  26. onurB onaczuCMarch 28, 2022 at 12:07 AM

    Hi! How should I wire the pot? Sorry. I'm a noob.

    ReplyDelete
  27. Gustavo G.C.December 17, 2023 at 9:42 AM

    This comment has been removed by the author.

    ReplyDelete