Pages

▼

Tuesday, March 3, 2015

Laney Super Group Emulator

This was a request that came in from Cody from the They Remained Silent blog. It's an emulator of the Laney Super Group 100 watt head designed by Heuller Pinson (MallerMB). I would assume you should bias the JFETs to ~4.5v then adjust from there. Don't have a ton of info on this other than that. This one's laid out for onboard 9mm pots mounted from the solder-side. Cody asked for it to fit in a 125B, but you should be able to squeeze it into a 1590B.


Here's the schematic if anyone wants it.





at

10 comments:

  1. UnknownNovember 20, 2015 at 4:30 AM

    Sorry for ask:
    This is a pedal to record in line or is a ocb to install the phone and use as amp?

    ReplyDelete
    Replies
    1. dtgehringNovember 23, 2015 at 4:18 PM

      It's just a pre-amp emulator, it won't work as a headphone amp.

      Delete
  2. UnknownMay 15, 2016 at 11:05 AM

    Has anyone verified this schematic?
    - it doens't play nice as a vero build

    ReplyDelete
  3. UnknownApril 30, 2017 at 10:50 PM

    Yes it works!

    ReplyDelete
  4. MetalheadMarch 15, 2018 at 4:07 AM

    This is laney supergroup 100 ?

    ReplyDelete
  5. UnknownNovember 10, 2018 at 1:30 PM

    would you plug it to "return" of the loop or to the standar input of an amp?

    ReplyDelete
    Replies
    1. Effects LayoutsNovember 10, 2018 at 3:39 PM

      You could try it in the effects loop, but generally dirt pedals sound better going into the the input of an amp.

      Delete
  6. JabaJ7CApril 25, 2019 at 3:00 PM

    hello do you have any schematic of a clean preamp? Is that clean?

    ReplyDelete
  7. AlexNovember 28, 2023 at 4:03 PM

    hi, do you have the super truper pdf file, I need to fix mine

    ReplyDelete