Pages

Friday, March 19, 2021

Catalinbread Karma Suture

 Happy Fuzz Friday everyone! This one recently got traced on the Aion blog (so go check out the full write up over there for more info and schematics). The Karma Suture is based on the Harmonic Percolator and has come in both germanium and silicon versions. The difference between the two are just a couple value changes, so you can build either version on the same board. Value differences are outlined below.

 




22 comments:

  1. Very cool. Thanks David!
    How are things going for ya?

    ReplyDelete
  2. Thanks! I made my own pcb, very cool pedal!Thanks for you lessons on youtube!Now i can easy make any pcb!

    ReplyDelete
  3. Diylc. Very easy for me. Really, one hour to do pcb for me!

    ReplyDelete
    Replies
    1. Nice. :-)
      I like DIYLC as well, but i don’t have Photoshop to do the groundplane. I am still searching for an alternative. How do you do yours?

      Delete
    2. PioneerSx... you could try Gimp. It's a free, open source Photoshop alternative.
      www.gimp.org

      Delete
    3. i use corel draw to trace lines for cnc router
      https://youtu.be/WvfBaE81d-A

      Delete
  4. HI, we have kindly request for Suhr Riot Reloaded edition. Shematic here:

    http://guitar-fx-layouts.42897.x6.nabble.com/Suhr-Riot-Reloaded-td45067.html

    Thank u so much!

    ReplyDelete
  5. Etched PCB silicon version built and verified. Used a BC560C as Q1 and a 2N2222 as Q2. Input and output lug numberings are inverted though. Other than that great job as always! :)

    ReplyDelete
    Replies
    1. This comment has been removed by the author.

      Delete
  6. Did germanium version.Etched pcb. Works great. Nice fuzz . Very large scale of sounds from overdriwe to fuzz.

    ReplyDelete
  7. Hi!
    Could you please trace this great analog bass chorus?
    http://byocelectronics.com/basschorusschematic.pdf

    ReplyDelete
  8. thanks for the effectslayout for making lots of great PCB layouts. i found modded ultra flanger using BBD MN3207 with some fixes.
    Here is the link : https://www.dropbox.com/s/xrmpvlmfmwrq113/Ultraflanger_thomasha.pdf?dl=0
    can you make a PCB layout for the schematic above? i am not good at making PCB layout. I would be very grateful if you want to make a PCB layout. Thank you very much.

    ReplyDelete
  9. Dod Boneshaker request
    http://guitar-fx-layouts.42897.x6.nabble.com/DOD-Black-Arts-Boneshaker-Verified-td41181.html

    ReplyDelete
  10. Replies
    1. https://english.electronica-pt.com/components-cross-reference?ref=BC550

      Delete
  11. If I make the Silicon version and use a 1uF for C3 - what type capacitor would you recommend? (Ceramic/Film/Box) or an Electrolytic (and, if so, on which side would the negative lead be)?

    ReplyDelete
  12. Hello, I need help, I want to build a germanium version of this pedal, but there is one problem, the R6. English is not my native language, so sometimes there are some problems with the terms, R6-jumper, how to get it right? I'm sorry that this question is stupid, I will be grateful for your help, have a nice day.

    ReplyDelete
    Replies
    1. A jumper is just using a piece of wire to connect the pads of R6. I usually use a cut off piece from a resistor or capacitor.

      Delete

  13. Thank you very much, everything is clear, the problem is in the translation)))) Thank you again.

    ReplyDelete