Pages

Friday, May 8, 2020

Frantone Lo-Tone Classic Fuzz

Here's an interesting one from Frantone for Fuzz Friday. Think the first half of a Big Muff into an LM386. Schematic over on FSB here.


9 comments:

  1. It´s possible someday can made the Thrash Master FX59 please??? thnx for all layouts, is the best page!!!

    ReplyDelete
  2. does anyone know a good website to get parts from? I am finding trouble finding 1nf and 100nf polyester mylar capacitors

    ReplyDelete
    Replies
    1. If you're after poly mylar caps, check out Tayda Electronics. For higher quality parts I suggest Arrow or Mouser.

      Delete
  3. Can we use mpas13 instead of mpsa18?

    ReplyDelete
    Replies
    1. The MPSA13 is too high hFE being a darlington transistor. 2N5088, 2N5089, BC549C or even a higher gain 2N3904 would be better substitutions.

      Delete
  4. Hi there could you recommend an equivalent diode for the 1N34A (if such a thing exists)? I'm itching to build this and that is the only component that I can't get my hands on.

    ReplyDelete
    Replies
    1. Those are being used as clipping diodes, so almost anything will work. You can try other germaniums (Russian D9 diodes are what I use for germanium diodes these days), or others like 1N4148, red LEDs... they will alter the tone a bit, but it will still work. Use sockets and try out different diodes and see what sounds best to you.

      Delete
    2. Oh wow I have so much to learn! Thanks so much for your help!

      Delete
  5. I built this on perfboard and everything works like it should. Sounds good, too. Thanks for this and all the other great layouts.

    ReplyDelete