Pages

Monday, February 22, 2016

Lovepedal Kalamazoo

Here's another overdrive from Lovepedal, the Kalamazoo. Somewhat similar to the Timmy/OD11 but with different tone controls. D5 on originals is a 1N914/4148 (they're pretty much the same diode), but a 1N5817 or even a 4001 would probably bet better (it's for polarity protection). Also, I've included pads for the capacitor labeled "Cx" on the layout. Some find adding a 820pF capacitor there helps improve the sound, but if that value cuts too much high end, try something in the 47-470pF range.


9 comments:

  1. this one is verified.
    I use 1N4148 on D5 and a 100nF capacitor on labeled Cx cap, but I'll do some experiments on the cap.
    hardly hear the difference when I turn the tone pot around, but I guess it's because I use 2.7k resistor instead of an exact 2.74k.
    anyway, this one will surely stay on my pedal board.

    ReplyDelete
  2. Hello where is the transfer because not found in the Dropbox folder Lovepedal !
    Tanks

    ReplyDelete
    Replies
    1. Sorry about that! Forgot to upload it. Should be there now.

      Delete
  3. How do you wire the input and output?

    ReplyDelete
    Replies
    1. You mean like to the footswitch? Check out the General Layouts Notes tab at the top of the page. Or just google footswitch wiring.

      Delete
  4. This comment has been removed by the author.

    ReplyDelete
  5. But how to make the correct decoupling of potentiometers, buttons, and jacks? (

    ReplyDelete
  6. Souns great with 470p in Cx

    Thank you for the layout!

    ReplyDelete
  7. @Effects Layouts I love this. Sounds amazing! Just like your Amp 11 layout. Thank you sir!

    ReplyDelete