Pages

▼

Friday, May 15, 2015

DOD Studio BiFET Preamp 410

The original DOD units had "balanced" XLR output as well as the normal 1/4" jack and no footswitch. This has been adapted for stompbox use and could work well with acoustic guitar.


at

14 comments:

  1. fuss buzzMay 30, 2016 at 12:19 PM

    Hi bro, how could i have xlr jack on this one like the original?
    Can you tell me please?

    ReplyDelete
    Replies
    1. Effects LayoutsMay 31, 2016 at 10:08 AM

      Check out the discussion over on lvlark's blog on this

      http://tagboardeffects.blogspot.com/2013/10/dod-studio-bifet-preamp-410.html

      Delete
    2. UnknownJuly 31, 2018 at 9:40 PM

      Hi,
      that discussion doesn't has any info on the circuit for the XLR low-Z output.

      Anyone has any info or that part of the schematic?

      Thanks

      Delete
  2. fuss buzzJune 4, 2016 at 11:54 PM

    thanks mate.
    cheers from bali.

    ReplyDelete
  3. Ian H NelsonDecember 7, 2016 at 3:50 PM

    Vol 2 to Out I assume, Vol 1 not connected?

    ReplyDelete
    Replies
    1. Effects LayoutsDecember 7, 2016 at 4:02 PM

      Vol 1 to ground

      Delete
    2. Ian NDecember 8, 2016 at 3:46 AM

      Thanks! Will try to verify this over the weekend.

      Delete
    3. Ian H NelsonDecember 24, 2016 at 2:23 AM

      Verified! I'm quite pleased with how it sounds. Nice tone control.

      Delete
  4. ThaipedalstompboxNovember 10, 2017 at 11:17 PM

    Verified!! For Tone Control,Nice Sounds.

    ReplyDelete
  5. FireproofAugust 27, 2019 at 10:01 AM

    Hi any tl081 replacement? Tnks

    ReplyDelete
  6. FadliMay 19, 2020 at 3:40 AM

    Why out put its low?

    ReplyDelete
  7. FireproofJune 5, 2022 at 3:11 PM

    Hi, how can use an TL072, JRC4558 or 741CP in place of the TL081? tnks

    ReplyDelete
  8. FernandoFebruary 7, 2023 at 6:42 PM

    I'm built this circuit and I'm guessing It amazing! Clean tone and good eq. For testes, I used 15nf intead 22 nf to get more mid-bass

    ReplyDelete